Dual XDMA7715 owner manual Function, Call

XDMA7715 OPERATION

Bluetooth® Operation (Optional)

Function	Description
	Press once. An "_" will appear on the display.
	Input the desired phone number using the 0-9, *, # buttons on the
Making a Phone Call	head unit front panel. Press to begin dialing.
	A phone call may also be placed from your mobile device using
	the keypad, phone book or speed dial. When a call is placed from a
	mobile device, “DIALING” will appear on the head unit display.
	To enter last number dialing mode, press	, then press a second
	time. The head unit will display "Last Number Dialing."
Last Number Dialing	Press KEY 0 to cycle through the received, dialed or missed call
	categories. Rotate the rotary encoder to cycle through the last 5 calls
	in the selected category.
	Press to begin dialing the selected number. “DIALING” will appear
	on the head unit display.
	If an incoming call is detected, the head unit will automatically switch
	to Bluetooth mode, muting any current audio.
	The incoming phone number will scroll across the display, the phone
	icon will flash on the display, and a ring tone will be audible from the
Receiving a Phone	vehicle speakers. See Bluetooth Settings for speaker configurations.
Call	NOTE: The ring audio level will depend the mobile device and head
	unit ring volume and audio settings. If the ringer on the mobile device
	is off, you may not hear an incoming ring tone.
	Press on the head unit or BTM60 to receive a call. The phone icon
	will illuminate solid.
Refusing a Call	To refuse an incoming phone call, press and hold MUTE for 3
	seconds.
	The head unit will display the elapsed time of the phone call.
During a Phone Call	The rotary encoder will adjust the volume of the call.
	Press MUTE to select between microphone on (MIC ON) and
	microphone off (MIC OFF).
	To transfer the phone call between the head unit and the mobile
Audio Transfer	device, press and hold DISP for 3 seconds during a call. Tip: transfer
	audio to your mobile device before turning the head unit off.
Call Waiting	When a second call is incoming, press	to activate call waiting. The
	current call will be placed on hold, and the second call will be active.
	Press again to return to the first call.
Call Hold	Press TALK to place the current call on hold. To resume the phone
	call, press TALK again.
	Hold MUTE for 3 or more seconds to end a call.
Ending a Phone Call	If the phone call was received, the head unit will return to previous
	mode when call is ended.
18