XDM6825 OPERATION
Faceplate Removal
Power On/Off
Mode
Loudness
Volume
Programmable
Preset EQ Curves
Display
Set the Clock
12/24-hour Clock
General Operation
Press RELEASE and pull away from the left side to remove. To
Remove trim ring and install supplied #1 x 7/32” Phillips head screw through left side of mounting frame into faceplate.
Press POWER or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically. Press POWER to turn the unit off.
Press MODE to select between tuner, CD player and auxiliary input. Modes of operation are indicated in the display.
Press LOUD to activate and deactivate the loudness contour curve. Activating this feature will enhance the bass and treble frequencies when listening to music at low volumes.
Adjust volume using rotary encoder
Press and hold POWER for 3 seconds to program currently selected volume level.
Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK and OFF (default) equalization curves. Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).
Press DISP to select between clock and radio frequency (tuner mode), clock and CD track/elapsed time (CD mode), or clock and AUX (AUX mode).
With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nn to adjust the hours and TUNE ll to adjust the minutes. Press DISP momentarily to save the selected time.
The clock will display
5