XD5250 OPERATION
General Operation
Faceplate Removal
Power On/Off
Mode
Auxiliary Input
Volume
Display
Set the Clock
Reset
Press RELEASE and pull away from the left side to remove. To
Remove trim ring and install supplied #1 x 7/32” Phillips head screw through left side of mounting frame into faceplate.
Press 
to turn the unit on. Inserting a CD will turn the unit on automatically. Press and hold for three seconds 
to turn the unit off.
Press MODE to select between AM/FM, CD or auxiliary input. Modes of operation are indicated in the display.
Insert a 3.5mm connector in the front panel AUX port. Connect the other end of the 3.5mm connector to the headphone output of an audio device, MP3 player, etc. Press MODE to select AUX mode.
Adjust volume using the rotary encoder
The radio frequency (tuner mode) and CD track/elapsed time (CD player mode) will be shown by default. Press DISP to display the clock, and press DISP again to return to default display.
Press and hold DISP for 2 seconds, the clock will begin to flash. Press TRACK nnto adjust the hours and TRACK ll to adjust the minutes. Press DISP or wait 5 seconds to save the clock settings.
The clock will display
Press and hold for more than 2 seconds to RESET the unit upon initial installation. The RESET button is located behind the faceplate.
6