CD Player Operation, Compatibility | Dual X2DMA400 instruction

X2DMA400 OPERATION

CD Player Operation

Insert CD

Eject CD

Track Select

Fast Forward/Reverse

Pause

Intro

Repeat

Random

CD-R/CD-RW

Compatibility

With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback.

Press EJECT to eject the CD. The unit will change to previous mode of operation. If the disc is not removed within 10 seconds, the unit will reload the disc. The unit does not have to be turned on to eject CD.

Rotate tuning knob right to skip to the beginning of the next track. Rotate tuning knob left to return to the beginning of the current track. Rotate tuning knob left again to skip to the beginning of the previous track.

Press and hold TRACK llor TRACK nn to fast forward or reverse a track.

Press l/ II to temporarily stop CD playback. Press l/ II again to resume playback.

Press INT to enter the Intro menu, then turn the tuning knob to select one of the following options:

•OFF - Cancels the INT function.

•ALL - Plays the first 10 seconds of each track.

Press RPT to enter the Repeat menu, then turn the tuning knob to select one of the following options:

•ALL - Plays all tracks on CD.

•ONE - Continuously repeats selected track.

Press RDM to enter the Random menu, then turn the tuning knob to select one of the following options:

•OFF - Cancels the RDM function.

•ALL - Plays all tracks in random order.

Some CD-Rs and CD-RWs may be incompatible with this unit, depending on media type and recording method. In addition, the following CDs may be incompatible with this unit:

CDs exposed to extreme temperatures or direct sunlight for extended periods of time, CDs recorded in which a recording session failed or a re-recording was attempted and, or encrypted or copy-protected CDs which do not conform to the audio CD-DA red book recording standard.