AM/FM Tuner Operation, USB / SD Card Operation

MXD105 OPERATION

AM/FM Tuner Operation

Seek Tuning

Manual Tuning

Band

Storing and Recalling Station Presets

Press TUNE nnor TUNE llmomentarily to seek to the next strong station.

Press and hold TUNE nnor TUNE lluntil "MANUAL" appears, then press TUNE nnor TUNE llmomentarily to change radio frequency up or down one step at a time. Press and hold to advance quickly.

Press BAND to select between FM1, FM2, FM3, AM1 and AM2 bands.

Up to 18 FM stations and 12 AM stations can be stored. To store a station, select the desired band and station. Press and hold the desired preset button (1-6) for more than

2 seconds. When stored, the preset number will appear in the display. The station can be recalled anytime by pressing the corresponding preset button.

USB / SD Card Operation
Connecting a USB Device	To play MP3/WMA files from most USB mass storage

(sold separately)	devices, line up the USB connector and insert the USB
	device into the MXD105's USB port.
Inserting an SD Card	To play MP3/WMA/WAV files from an SD card, insert an SD
(sold separately)	card into the SD card slot with the label facing left. It will
	click into place when properly inserted. To remove the card,
	press in until it clicks, then pull to remove.
Playing Music	When a USB device is first connected, “LOAD” will appear in
	the display and playback will begin momentarily. Depending
	on the number of files and folders, it may take several
	seconds for the device to begin playing. If no valid MP3/
	WMA files are detected, “NO FILE” will be displayed and the
	last mode will be resumed.
Track Select	Press TRACK ll to skip to the beginning of the next
	track. Press TRACK nn to return to the beginning of the
	current track. Pressing TRACK nn again skips to the
	beginning of the previous track.
Fast Forward and	Press and hold TRACK llor TRACK nn on the remote
Reverse	control to fast forward or reverse a track.
Pause	Press	l/ II to temporarily stop USB playback.
Displaying Information	Press	l/ II again to resume playback.
	ID3 tag and file/folder information will be automatically
	changed during playback. Press DISP to view the clock.
	Default display will resume after five seconds.

8