Dual MXD40 owner manual General Operation

Page 5

MXD40 OPERATION

Faceplate Removal

Power On/Off

CD Mode

Tuner Mode

Bass Boost

Volume

Display

Set the Clock

General Operation

Press REL and pull away from the left side to remove.

To re-install, insert right side of faceplate first then push left side to secure.

*For semi-permanent faceplate installation, remove trim ring and install supplied Phillips head #1 screw through left side of mounting frame into faceplate.

Press PWR to turn the unit on. Inserting a CD will turn the unit on automatically. Press PWR to turn the unit off.

Insert a CD or press l/ II to begin or resume playback.

Press PWR or BAND to begin or resume tuner operation.

Press BASS to activate and deactivate bass boost curve. Activating this feature will enhance the bass frequencies when listening to music at low volumes.

Adjust volume using VOL ▲ or VOL (00-39).

Press DISP to display the clock. The radio frequency (tuner mode) or CD track/elapsed time (CD player mode) show by default.

Press DISP to display the clock, then release. Press and

hold DISP then press TUNE to adjust the hours and

TUNE to adjust the minutes. Release DISP to save the selected time.

5

Image 5
Contents MXD40 Before You Start PreparationGray Blue Black Yellow Wiring DiagramMarine Control LocationsGeneral Operation Reset Audio Bass Treble Balance Fader Tuner Operation CD Player Operation Limited One-Year Warranty CD Player FM Tuner AM Tuner General SpecificationsProblem Cause Action TroubleshootingNamsung America Inc 21318 64th Ave. South Kent, WA Toll Free DMP65 Preparation/Installation Limited One-Year Warranty Specifications