Dual MXD662B owner manual General Operation, Faceplate Removal

Page 6

MXD662B OPERATION

General Operation

Faceplate Removal

Semi-Permanent Faceplate Installation

Power On/Off

Mode

Auxiliary Input

Volume

Mute

Preset EQ Curves

Reset

Display

Set the Clock

12/24-hour Clock

Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure.

Remove trim ring and install supplied #1 x 7/32” Phillips head screw through left side of mounting frame into faceplate.

Press or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically. Press and hold to turn the unit off.

Press MODE to select between AM/FM, CD player, auxiliary input and USB. Modes of operation are indicated in the display.

Note: CD mode will not appear unless a CD is inserted.

Insert 3.5 mm plug to connect your portable audio device.

The steering wheel interface input located on the back of the Adjust volume using rotary encoder (00-46).

Press MUTE to silence the audio. “MUTE” will flash in the display. Press MUTE again to cancel.

Press EQ to enter EQ setup menu, then use the rotary encoder to select between POP, JAZZ, CLASSIC, BEAT, ROCK and FLAT (default) equalization curves. Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).

Press to RESET the unit upon initial installation or if abnormal operation occurs. The reset button is located behind the faceplate.

Press DISP to select between clock and different types of information, such as radio frequency, CD track or MP3/USB song information.

With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nnto adjust the hours and TUNE llto adjust the minutes. Press DISP momentarily to save the selected time.

The clock will display 12-hour AM/PM time in USA frequency spacing mode (PM 10:00). In European frequency spacing mode, the clock will display 24-hour time (22:00).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents MXD662B Before You Start Please read entire manual before installationPreparation Getting StartedWiring Diagram RCA ConnectionsControl Locations Receiver PowerPreset 1/Repeat Tune/Track Down ReleaseControl Locations Remote General Operation Faceplate RemovalSetup Menu Setup MenuVolume Bass Treble Balance Fader Subwoofer Source Level Seek Tuning Manual Tuning Scan Tuning Band Preset ScanAM/FM Tuner Operation CD Player Operation CD Player Operation MP3/WMA Files CD Player Operation MP3/WMA Files Folders will be displayed first, followed by any filesFolder Access Repeat Random Intro Media Compatibility Playback Order Following types of discs/files are compatibleMP3 Tag Display Recommended Settings Transfer Bit ratesUSB Operation MP3/WMA Files Optional USB Operation MP3/WMA Files Optional Title Icon Artist IconUSB Operation MP3/WMA Files Optional MP3 Tag Display USB Charging Limited One Year Warranty What to do?Call us toll-free at Mail us at cs@dualav.com Troubleshooting General Problem Cause ActionCD Player FM Tuner AM Tuner General Tuning range 87.5MHz-107.9MHzDimensions 7 x 7 x 2 178 x 178 x 51 mm Operating voltage 11-16 VDC, negative groundMXD662B Operation Dual Electronics Corp Toll Free Dual Electronics Corp. All rights reserved

MXD662B specifications

The Dual MXD662B is a cutting-edge device that has gained significant attention in the world of audio processing and signal control. As a versatile and efficient dual-channel audio processor, it caters to a wide range of applications in both professional and consumer markets. This article explores the main features, technologies, and characteristics that make the Dual MXD662B a compelling choice for audio enthusiasts.

One of the standout features of the MXD662B is its dual-channel architecture, which allows for the simultaneous processing of two independent audio signals. This dual capability is particularly beneficial in setups requiring stereo sound, as it ensures that audio quality remains high while accommodating different source inputs. The device supports various audio formats, making it suitable for both digital and analog systems.

The MXD662B leverages advanced digital signal processing (DSP) technology, enabling it to perform complex audio manipulations in real-time. Users can experience enhanced sound quality thanks to built-in equalization options, dynamic range compression, and frequency response adjustments. This makes it an excellent tool for sound engineers looking to achieve precise audio mixing and mastering.

In terms of connectivity, the MXD662B is equipped with multiple input and output options, including balanced and unbalanced connections. This versatility allows it to integrate seamlessly into existing audio setups, making it a favorite among professionals in studios, live environments, and home theaters.

The device also features low latency, ensuring that audio processing occurs in real-time without noticeable delay. This characteristic is crucial for applications where timing is essential, such as live performances or interactive audio installations. Moreover, the user-friendly interface simplifies operation, granting users quick access to key functions and settings.

Overall, the Dual MXD662B stands out due to its robust feature set, adaptability to various audio applications, and high-quality sound processing capabilities. With its combination of dual-channel performance, DSP technology, and extensive connectivity options, it is a reliable choice for audio professionals and enthusiasts alike, ensuring exceptional audio experiences across different environments. Whether for mixing, mastering, or live sound reinforcement, the MXD662B delivers the performance needed to meet the demands of today’s audio landscape.
Top Page Image Contents