DCBT304U OPERATION
Faceplate Removal
Power On/Off
Mode
Auxiliary Input
Volume
Display
Reset
Set the Clock
Setup Menu
General Operation
Press RELEASE and pull away from the left side to remove. To
Press 
or any other button (except EJECT) to turn the unit on. Press 
to turn the unit off.
Press MODE to select between AM/FM, CD player, auxiliary, USB and Bluetooth. Modes of operation are shown in the display.
NOTE: CD and USB modes will not appear unless a CD is inserted or USB device is connected.
The DCBT304U offers a 3.5 mm auxiliary input port on the front panel of the unit for connecting an audio device, MP3 player, etc. Press MODE to select auxiliary input mode.
Adjust volume using volume knob (00-47).
Press DISP to show the clock. During playback of MP3/WMA files, ID3 tag information, elapsed time, track number and file/folder names will automatically rotate on the display.
Press RESET upon initial installation or if abnormal operation occurs. Reset button is located behind the front panel.
With the unit on, press and hold DISP until the clock begins to flash, then release. Turn the volume knob to the right to adjust the hours or to the left to adjust the minutes.
The clock will display
Press and hold AUDIO/MENU for more than 3 seconds to access the setup menu. Press AUDIO/MENU momentarily to select between the menu functions and rotate the volume knob left/right to adjust or activate the desired function.
5