Protection Circuit

The CLASSÉ CAM200 power amplifier is equipped with both regular and balanced inputs, either one may be used SEPARATELY, BUT NOT SIMULTANEOUSLY. Be sure that the CAM200 is OFF before changing any connections.

When the amplifier is shipped from Classé, there is a jumper at the balanced input (XLR) between pin 1 and 3. To use the amplifier in single ended mode simply connect a single ended inter- connect from the preamplifier to the RCA input of the CAM200.

To use the CAM200 in balanced mode, remove the single ended interconnect and remove the jumper at the XLR; please keep this jumper for later use; connect the preamplifier to the CAM200 using balanced interconnect.

The XLR connector of the CAM200 is configured as below

PIN 1: DRAIN

PIN 2: POSITIVE (NON-INVERTED) SIGNAL, “HOT”

PIN 3: NEGATIVE (INVERTED) SIGNAL

All Classé preamplifiers and amplifiers have the same pin out configuration of the XLR. Other manufacturers may have different XLR pin out configuration please contact the manufacture if you wish to maintain absolute phase throughout your system when connect Classé’s equipment with other manufacturer’s equipment.

Having confirmed or established the correct phasing, be sure the amplifier is off, then plug the XLR connector of the balanced interconnect into the locking XLR connector on the rear panel of the CAM200. Push the connectors in until the locking mechanism clicks. To remove the connectors, press the tab above the connector while pulling gently on the connector body.

CAM-200 specifications

The Classe Audio CAM-200 is a distinguished model in the high-performance amplifiers category, renowned for its exceptional sound quality and robust engineering. Known for its sleek aesthetics and powerful performance, the CAM-200 epitomizes Classe's commitment to delivering an unparalleled audio experience.

One of the main features of the CAM-200 is its Class AB amplification, which combines the benefits of both Class A and Class B designs. This unique configuration allows the amplifier to produce high power levels while maintaining low distortion, ensuring a clean and dynamic sound across the frequency spectrum. With an output of 200 watts per channel at 8 ohms, and the capability to drive lower impedance loads, the CAM-200 is versatile enough to handle a wide range of speakers with ease.

Another standout characteristic of the CAM-200 is its fully balanced design, which significantly reduces noise and interference, leading to a more refined sound. This approach is crucial in high-end audio systems where signal integrity is paramount. The balanced circuitry works harmoniously with both single-ended and balanced input sources, providing flexibility in system configurations.

The CAM-200 also features advanced thermal management systems, including high-quality heat sinks and efficient power supplies. This not only enhances reliability but also allows the amplifier to maintain optimal performance even during extended listening sessions at high volumes. The low noise floor of the CAM-200 contributes to its ability to resolve intricate details in music, bringing out nuances that might otherwise be lost in inferior designs.

Additionally, the build quality of the CAM-200 reflects Classe’s dedication to excellence, as it is constructed with premium materials and finishes. The rugged chassis provides excellent isolation from outside interference, while the minimalist design philosophy ensures that form complements function.

In conclusion, the Classe Audio CAM-200 is more than just an amplifier—it's a gateway to an extraordinary audio experience. With its Class AB amplification, fully balanced design, and robust build quality, it caters to the discerning audiophile seeking depth, clarity, and power in their sound systems. Whether used in a dedicated listening room or as part of a comprehensive home theater setup, the CAM-200 is poised to deliver a listening experience that is both immersive and engaging.