Rear Stand Installation Instructions

The Boston Bravo 20 can be used horizontally on an untilted flat surface, such as a table, shelf or the top of a rear projection TV using the included rear bracket stand.

First mount the speaker to the bracket (see above).

Next, place the speaker in the location that you intend to use it in (ie, correct grille/logo and tweeter/woofer orientation). Hold the stand in an upright position as indicated (note that the stand angles away from the bracket). Line up the stand with the lower slot in the bracket so that the 2 middle “fingers” are on either side of the web that bisects the slot. Slightly angle the stand away from the bracket and push the stand fingers up into the slot so that the 4 in- ner “fingers” are placed inside the slot and the 2 outer “thumbs” are placed outside the slot. Gently push the stand up into the bracket slot until the “fingers” and “thumbs” snap into place.

Attach the rubber feet to the stand and cabinet (detailed on page 4).

web in slot

	4 inner "ngers"	Push stand
	4 inner "ngers"	into bracket
		into bracket
		slot until
	2 outer "thumbs"	“fingers” and
	2 outer "thumbs"	“thumbs” click
		“thumbs” click
		into place

Stick a rubber foot to both pads on the stand and to both lower corners of the cabinet (do not apply to grille)

Rotating the Logo for Horizontal Mounting or Placement

The logo plate on the Bravo 20’s grille can be rotated 90° in either direction to enhance the speaker’s appearance when mounting or placing it in a horizontal position. To rotate the logo:

Remove the grille and turn it over.

Locate the logo’s spring loaded post protruding through the bottom inside portion of the grille.

Place your thumb against the post and press firmly until the logo pops forward.

Rotate the logo to the desired position and release pressure on the post allowing it to snap back into the seated position.

Listening Levels and Power Handling

The listed power recommendations in the Specifications section assume you will operate your system in a way that will not produce distortion. Even these rugged speakers can be damaged by a modest amplifier if it produces distortion. If you hear a harsh, gritty noise, turn down the volume. Prolonged or repeated operation of your speaker with a distorted signal from the amplifier can cause damage that is not covered by the warranty.

Limited Warranty

Mounting Possibilities of the Bravo 20

We designed the Bravo 20 to be mounted or placed in a wide variety of configurations. Shown below are seven of the most common possibilities for you to consider.

Boston Acoustics warrants to the original purchaser of our passive loudspeakers that they will be free of defects in materials and workmanship for a period of 5 years from the date of purchase. Your responsibilities are to install and use them according to the instructions supplied, to provide safe and secure transportation to an authorized Boston Acoustics service representative, and to present proof of purchase in the form of your sales slip when requesting service. Excluded from this warranty is dam- age that results from abuse, misuse, improper installation, accidents, shipping, or repairs/modifications by anyone other than an authorized Boston Acoustics service representative. This warranty is limited to the Boston Acoustics product and does not cover damage to any associated equipment. This warranty does not cover the cost of removal or reinstallation. This warranty is void if the serial number has been removed or defaced. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

If Service Seems Necessary

United States	Canada
First, contact the dealer from whom	First, contact the dealer from whom
you purchased the product. If that is	you purchased the product. If that is
not possible, send an email to: support@bostona.com	not possible, send an email to: support@dmcanada.ca
or write to:	or write to:
Boston Acoustics, Inc.	D&M Canada
100 Corporate Drive	5-505 Apple Creek Blvd
Mahwah, NJ 07490 USA	Markham, ON L3R 5B1

All Other Countries

Contact the dealer from whom you purchased the product or contact your local distributor. For more information, please visit bostonacoustics.com/support

20 specifications

Boston Acoustics, a renowned name in the world of audio equipment, has gained recognition for its commitment to delivering exceptional sound quality across various product categories. Among its impressive lineup, the Boston Acoustics 20 stands out as a versatile speaker, designed to cater to the needs of audiophiles and casual listeners alike.

The Boston Acoustics 20 is a bookshelf speaker, crafted to provide a seamless blend of performance and aesthetics. With its sleek design, it fits effortlessly into any home decor, whether in a modern or traditional setting. The speaker is available in multiple finishes, including black, walnut, and cherry, ensuring that it appeals to a wide range of personal tastes.

One of the key features of the Boston Acoustics 20 is its impressive sound reproduction capabilities. The speaker utilizes a high-performance 5.25-inch woofer, which delivers deep, rich bass that enhances the overall listening experience. Additionally, a 1-inch soft dome tweeter ensures crystal-clear high frequencies, allowing for a well-balanced sound across the entire frequency spectrum. This combination allows the speaker to produce an immersive audio experience that complements various genres of music and movie soundtracks.

The Boston Acoustics 20 is equipped with advanced technologies that further elevate its performance. The speaker features a proprietary port design, which minimizes turbulence and improves sound clarity, resulting in a cleaner bass response. This design also allows for efficient sound dispersion, making the speaker suitable for larger rooms without compromising audio quality.

Another notable characteristic of the Boston Acoustics 20 is its ability to be easily paired with various audio components, such as receivers and amplifiers. Its compatibility with a wide range of equipment makes it an ideal choice for both beginners and seasoned audio enthusiasts looking to upgrade their sound systems.

To top it off, the Boston Acoustics 20 speaker is engineered for durability. The robust construction ensures longevity, while the quality materials used in its design contribute to the overall acoustic performance. This makes it a reliable addition to any home audio setup.

In summary, the Boston Acoustics 20 combines elegant design and impressive technology, offering a remarkable sound experience that appeals to a diverse audience. Whether for music, movies, or gaming, this speaker proves to be an exceptional choice in the realm of audio equipment.