Directed Audio D1200, D2400 owner manual Rear Panel Connections

Page 9

REAR PANEL CONNECTIONS

1.Fuses - These fuses protect the amplifier against internal electrical damage and are meant to protect the amplifier only. All other power connections should be fused at the source.

The D1200 uses 2-30A fuses, and the D2400 uses 3-40A fuses.

2.(+) 12 Volt Power - Connect this terminal through a FUSE or CIRCUIT BREAKER to the positive terminal of the vehicle battery or the positive terminal of an isolated audio system battery.

WARNING: Always protect this power wire by installing a fuse or circuit breaker of the appropriate size within 12 inches of the battery terminal connection.

2.Remote Turn On - This terminal turns on the amplifier when (+) 12 volt is applied to it. Connect it to the remote turn on lead of the head unit or signal source.

2.Ground - Connect this terminal directly to the sheet metal chassis

of the vehicle, using the shortest wire necessary to make this connection. Always use wire of the same gauge or larger than the (+) 12 volt power wire. The chassis connection point should be scraped free of paint and dirt. Use only quality crimped and/or soldered connectors at both ends of this wire. DO NOT connect this terminal directly to the vehicle battery ground terminal or any other factory ground points.

3.Speaker Terminals - Connect subwoofers to these terminals. (Refer to the Speaker Wiring Diagrams section of this guide.)

© 2005 Directed Electronics, Inc. all rights reserved

9

Image 9
Contents Models Congratulations Table of ContentsLimited TWO-YEAR Consumer Warranty „ High-speed Mosfet switching power supply Features„ Remote subwoofer level control function Threshold at which hearing loss may resultVehicle Servicing Note Installation GuidelinesDirected Electronics, Inc. all rights reserved Front Panel CONNECTIONS/CONTROLS Tion for ease of adjustment during listeningD1200/D2400 Rear Panel Connections Amplifier Connections Rear ESP Features and ControlsTo the other Status indicator will not flashIv. This option has the top light ESP Status Indicator Learn TX IDsUntil the on appears Green Solid Red Normal Operation Flashing ModeOvervoltage RedSpeaker Wiring Diagrams Combining Amplifiers DiagramsSlave/Master Switch Parallel Synced Gain CONNECTIONS/SETTINGSSubwoofer Wiring top view Synced amps must be set to the same position External Synced Bridged CONNECTIONS/SETTINGSExternal Synced Bridge Multiple Amplifier Combinations Crossover Settings and Gain Adjustment Directed Amplifier-VARAD Cross Reference Chart LED Tube Installation OptionalCEA Specifications Specifications Vista, California

D2400, D1200 specifications

The Directed Audio D1200 and D2400 are advanced car audio amplifiers designed to deliver exceptional sound quality and performance. These models are engineered for audio enthusiasts seeking powerful and reliable amplification solutions capable of enhancing their in-car audio experience.

The Directed Audio D1200 is a compact and lightweight amplifier, equipped with a high-efficiency class D architecture. This design allows it to produce 1200 watts of peak power while minimizing heat generation, making it suitable for a wide range of audio systems without compromising performance. The amplifier features a low-pass filter that helps in controlling the frequency response, ensuring that low-frequency sounds are delivered with clarity and depth. Additionally, its variable gain control allows users to tailor the output levels to their individual preferences, ensuring a personalized listening experience.

On the other hand, the Directed Audio D2400 takes power and performance a notch higher, boasting an impressive 2400 watts of peak power. This amplifier is also designed with class D technology, providing efficient operation and reducing power consumption. The D2400 comes equipped with advanced thermal management features, ensuring that it remains cool during extended use. Its built-in crossover options enable users to achieve precise sound tuning, allowing for optimal integration with subwoofers and other speaker components.

Both models incorporate innovative technologies aimed at enhancing audio fidelity. They feature high-quality signal processing, ensuring that sound remains clear, even at high volumes. The amplifiers are engineered with low distortion levels, providing accurate sound reproduction across various musical genres. Additionally, they include short circuit and overcurrent protection systems, which safeguard the amplifiers against potential damage.

Other key characteristics of the Directed Audio D1200 and D2400 include their robust construction, designed for durability and long-lasting performance. Their stylish designs make them a suitable addition to any audio setup, while the compact form factor ensures easy installation in diverse vehicle types.

In summary, the Directed Audio D1200 and D2400 amplifiers exemplify a commitment to delivering powerful, high-quality audio performance. With advanced technologies and user-friendly features, these amplifiers are ideal for anyone looking to elevate their car audio experience to new heights. Their blend of efficiency, power, and sound fidelity makes them standout choices in the competitive market of car audio amplification.