Directed Audio 600/4 manual Specifications, Greater than 95 dB 20-20,000 Hz ± 0.5 dB

Page 13

SPECIFICATIONS

Directed model

600/4

RMS continuous power per channel, All channels

75

driven into 4 ohms from 20 to 20,000 Hz, with less

watts

 

than 0.08% Total Harmonic Distortion @ 14.4 VDCC

 

RMS continuous power per channel, All channels

20/125

driven into 2 ohms from 20 to 20,000 Hz, with less

watts

than 0.1% Total Harmonic Distortion @ 14.4 VDC

 

RMS continuous power, 2-channel operation, bridged

250x2

into 4 ohms from 20 to 20,000 Hz, with less than

watts

0.1% Total Harmonic Distortion @ 14.4 VDC

 

Dynamic power rating (IHF-202 Standard) bridged

600

into 4 ohms

watts

Signal-to-Noise Ratio

Frequency Response

Damping Factor @ 4 ohm

Crossover

Bass Equalization

Input Impedance

Input Sensitivity

Output Impedance

Supply Voltage

Fusing and Power

Minimum Cable Requirements (AWG) (Per amp, trunk mounted)

Greater than 95 dB

20-20,000 Hz ± 0.5 dB

Greater than 100

Switchable high or low pass 12 dB/octave, continuously variable from 50 to 500Hz

+8 dB, centered at 40Hz

20K ohms

Variable from 150 mV to 8 volt

2 to 8 ohms, stereo

4 to 8 ohms, bridged

10 to 16 VDC

50A

#8

© 2003 Directed Electronics, Inc

13

Image 13
Contents Model 600/4 Directed Electronics, Inc Congratulations Table of ContentsLimited TWO-YEAR Consumer Warranty „ Dual switchable 8 dB bass EQ func- tion FeaturesThreshold at which hearing loss may result „ Summed stereo full-range RCA output jacksInstallation Guidelines Directed Electronics, Inc Inputs of the amplifier Front Panel CONNECTIONS/STATUS LEDRear Panel Connections Amplifier Connections 600/4 Rear TOP Panel Controls TOP Panel FeaturesTwo Channel Stereo Speaker Wiring DiagramsSimultaneous Crossover Settings and Gain Adjustment Greater than 95 dB 20-20,000 Hz ± 0.5 dB SpecificationsCompany behind this system is Directed Electronics, Inc Directed Electronics, Inc Vista, California

600/4 specifications

The Directed Audio 600/4 is a high-performance, multi-channel amplifier designed to enhance the audio experience in automotive applications. This amplifier is particularly sought after for its combination of power, efficiency, and sound quality, making it a favorite among car audio enthusiasts.

One of the standout features of the Directed Audio 600/4 is its power output. The amplifier delivers an impressive 150 watts RMS per channel at 4 ohms and 300 watts per channel at 2 ohms. This allows users to drive a wide range of speakers, from factory systems to high-performance aftermarket setups. The robust power handling ensures that the amplifier can deliver clean, distortion-free sound at high volumes.

The Directed Audio 600/4 incorporates advanced technologies that contribute to its superior performance. Notably, it features a high-performance MOSFET power supply, which ensures efficient operation and minimizes heat generation. This design not only enhances reliability but also extends the amplifier's lifespan, making it a solid investment for those seeking long-term audio solutions.

Another key characteristic of the 600/4 is its versatile configuration options. The amplifier offers multiple channels, allowing users to adapt it to various setups. Whether running a complete component system with separate tweeters and woofers or bridging channels for subwoofer applications, this amplifier can be tailored to meet the specific needs of any audio system.

Additionally, the Directed Audio 600/4 features built-in crossover options, enabling users to fine-tune the frequency response to suit their speakers and personal preferences. The adjustable high-pass and low-pass filters provide the flexibility needed to achieve the perfect soundstage, making it easier to create a custom audio environment.

For added convenience, the amplifier is equipped with a remote gain control option, allowing users to adjust the amplifier's output from the front of the vehicle without needing to reach into the trunk or back seat.

In conclusion, the Directed Audio 600/4 stands out for its powerful performance, efficient technologies, and flexibility. With features that cater to both novice and experienced users, it represents an excellent choice for anyone looking to enhance their vehicle’s audio system.