Directed Audio A502, A404 owner manual LED Tube Installation Optional

Page 15

LED TUBE INSTALLATION (OPTIONAL)

This Directed Audio amplifier has been designed with a custom heat sink that can accommodate two (optional—not supplied) VARAD LED tubes.

1.Before installing the LED tubes, remove and discard the mounting feet from the VARAD LED tubes.

2.Slide each LED tube assembly into your Directed Audio amplifier heat sink. Ensure that the LEDs are facing out for optimal visibility. The wires from the LED tube assembly should be on the signal input end of the amplifier. The Black wire from the LED tube is ground and the Black/White wire from the LED tube is power.

4.Run the two wires from the tube assembly and connect them to the 4-pin LED/FAN input connector. Refer to the LED/FAN harness diagram given earlier in this manual.

NOTE:

If the optional fan IS NOT being used, it is recommended that the second LED tube be wired to this circuit. If the optional

 

fan is being used, it is recommended that the second LED tube be wired in parallel with the first LED tube.

Use the following cross reference chart to select the proper length VARAD LED tube for use with your Directed Audio amplifier.

Directed Amplifier—VARAD Cross Reference Chart

Directed Part Number

Directed Model

VARAD Model

QTY Required

 

 

 

 

45120

A502

HLX6, HL6, HLW9

2

45125

A802

HLX6, HL6, HLW9

2

 

 

 

 

45150

A404

HLX6, HL6, HLW9

2

 

 

 

 

45155

A1004

HLX12, HL12, HLW15

2

 

 

 

 

45095

D600

HLX6, HL6, HLW9

2

 

 

 

 

45100

D800

HLX6, HL6, HLW9

2

 

 

 

 

45105

D1200

HLX6, HL6

2

 

 

 

 

45110

D2400

HLX12, HL12

2

 

 

 

 

45165

D2205

(2) HLX12, (2) HL12

2 or 4

 

 

 

 

© 2004 Directed Electronics, Inc

15

Image 15
Contents A502 A404 Congratulations Table of ContentsLimited TWO-YEAR Consumer Warranty „ Selectable 12dB/octave two-way crossover FeaturesInstallation Guidelines Directed Electronics, Inc Frequencies and is used for subwoofers speakers Front Panel CONNECTIONS/CONTROLS A502-A404Amplifier Connections A404 Front Rear Panel ConnectionsFactory ground points Speaker Wiring Diagrams A502 Stereo Operation 2 Channel top view Speaker Wiring Diagrams A404Stereo Operation 4 Channel top view Channel Stereo with Mono Sub top view Crossover Settings and Gain Adjustment Directed Amplifier-VARAD Cross Reference Chart LED Tube Installation OptionalCEA Specifications Bridged 4 Ohm SpecificationsDirected Electronics, Inc Vista, California

A404, A502 specifications

Directed Audio, a pioneer in the car audio industry, has garnered attention with its innovative models like the A502 and A404. These two amplifiers showcase a blend of power, clarity, and advanced technology, aimed at enhancing the in-car audio experience for enthusiasts and casual listeners alike.

The Directed Audio A502 is a two-channel amplifier that delivers impressive performance with 50 watts RMS per channel at 4 ohms, offering a punchy sound without sacrificing fidelity. It features a high and low-pass crossover, allowing users to tailor their audio output to their specific setup, whether they're driving high-frequency speakers or deep bass subwoofers. The A502 is built with a sleek aluminum chassis that not only provides durability but also enhances the heat dissipation, ensuring reliable performance during extended use. The amplifier's compact size makes it an excellent choice for various vehicle installations, fitting effortlessly in tight spaces without compromising on sound quality.

On the other hand, the Directed Audio A404 is a four-channel amplifier designed for those looking to elevate their audio system further. It boasts 50 watts RMS per channel at 4 ohms and can be bridged to power subwoofers with 100 watts RMS at 4 ohms. This versatility makes the A404 a perfect match for full-range speakers and subwoofer combinations, enabling users to build a comprehensive audio system tailored to their listening preferences. Similar to the A502, the A404 includes selectable high and low-pass filters, expanding its adaptability.

Both models leverage Class D amplification technology, ensuring efficient power usage that results in less heat generation compared to traditional Class A/B amplifiers. This efficiency not only enhances performance but also contributes to a longer lifespan for both the amplifier and the audio components connected to it. Moreover, Directed Audio amplifiers come equipped with short circuit and thermal protection circuitry, safeguarding against potential damages during operation.

In terms of design, both amplifiers reflect a modern aesthetic with their clean lines and a minimalist profile. Their easy-to-read terminals and layout simplify installation, making them accessible for DIY enthusiasts. With a reputation built on quality and performance, Directed Audio A502 and A404 stand out in the competitive landscape of car audio, catering to diverse needs while delivering exceptional sound quality that transforms any driving experience into a remarkable audio journey.