Dual DLS5240 owner manual Wiring, LeftRight

DLS Series

INSTALLATION

Wiring

(+) (-) (+) (-)

Important:

Pay attention to the positive and negative polarity

(+) (-) (+) (-)

LeftRight

•Connect the speaker outputs from the head unit to the speakers.

•In some vehicles, it may be possible to utilize the existing speaker wiring. When doing this, be cautious of the polarity (+/-) of the speaker wires, as these wire colors vary for each vehicle.

Tip: Using factory wiring harness adapters for the head unit and speakers can help eliminate wiring issues.

•In some vehicles, it may be necessary to run new speaker wire throughout the vehicle. Observe caution when routing wires.

•Always use quality connectors that fit tightly, or solder each connection. It may be necessary to waterproof connections made inside door panels.

•Wiring speakers out-of-phase (the polarity of one speaker is wrong) will cause the speakers to sound poor, and have very little bass response.

3