Dual SD12 owner manual Installation, Before installation, please follow the following rules

Page 3

SD12 INSTALLATION

Installation

The following installation instructions are very basic. If you feel

CAUTION unsure about personally installing this speaker system, Dual recommends aquiring the services of a professional car audio

installation center.

Before installation, please follow the following rules:

1.Be sure to carefully read and understand the instructions before attempting to install this product.

2.For safety, disconnect the negative terminal from the battery prior to beginning the installation.

3.For easier assembly: If additional wiring is required, we recommend running all wires prior to mounting your speaker in place.

4.Use the highest quality connectors for a reliable installation and to minimize signal or power loss.

5.Use caution before you drill or cut! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

6.Never run speaker wires underneath your vehicle. Running speaker wires inside the vehicle provides the best protection from exhaust heat and environmental elements.

7.Avoid running wires over, near, or through sharp edged surfaces. We suggest you also use rubber grommets to protect any wires routed through metal, especially the firewall.

3

Image 3
Contents SD12 Getting Started SafetyBefore installation, please follow the following rules InstallationSpecifications Enclosure Guidelines Enclosure Guidelines Best Bass Performance Sealed EnclosureGood Bass Performance Better Bass PerformanceVented Enclosure Best Bass Performance/Medium Enclosure Bandpass EnclosureGood Bass Performance/Mini-Enclosure Better Bass Performance/Small EnclosureWhat to do? Limited One-Year WarrantySD12 Notes Dual Electronics Corporation Toll Free