Directed Electronics CO652, CO552 owner manual Door Mounting, Rear Deck Mounting

Page 4

needs.. The locations must be large enough for the speakers to fit.. Care is needed to ensure that the location you have chosen will not affect any of the mechanical or electrical operations of the vehicle..

Determining the best location for the speakers will depend on your cosmetic needs and your vehicle's interior.. If minimal intrusion in your vehicle is desired, factory speaker locations may be the ticket for you.. Placing the speaker in the factory location can often give very desirable results..

Door Mounting

When checking for possible speaker locations in the doors, check the operation of the window and all assemblies.. There is also a stabilizer stop bar in between the door and the door jamb.. This bar prevents the door from opening too far.. Many shade tree installers overlook this and check for clearance only when the door is fully open..

Figure 1

Figura 1

Abbildung 1

Inside

Dampening Mat

 

of Door

 

Speaker

 

 

cut out

 

 

Speaker installed

Coaxial

 

with no gaps

 

or air leaks

Driver

 

 

 

Door

Grille

Screws

 

Panel

 

 

Dampening on

 

 

top of outer

 

 

door skin

 

 

Rear Deck Mounting

In rear deck installations, check the operation of the trunk suspension springs or tension bars.. These tension bars move in the opening and closing of the trunk.. You cannot be too cautious during this part of the installation, In addition, do not locate the speakers too close to the back of the rear deck.. Installing the far screws will only be possible with the removal of the rear window..

Rear Seat

Rear/Trunk

 

of Car

Figure 2

Figura 2

Abbildung 2

© 2007 directed electronics—all rights reserved

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Component Speaker Introduction Table of ContentsPractice Safe Sound Installing Process What’s in the BoxTools of the Trade Finding Speaker Mounting LocationsDoor Mounting Rear Deck MountingInstalling the Mid/Woofers Surface Mounting Installing the TweeterFull Flush Mounting Installing the Crossover Figura Abbildung Flush MountWiring Diagram Specifications FeaturesInstallation DES HAUT-PARLEURS Médiaux ET DE Graves FrançaisOÙ Monter LES HAUT-PARLEURS Montage SUR UNE PortièreMontage EN Surface Installation DU HAUT-PARLEUR DaigusMontage Encastré Spécifications Installation DU RépartiteurCaractéristiques Español Ubicaciones DE Montaje DE LOS AltavocesMontaje EN LA Puerta Montaje EN LA Repisa TraseraMontaje EN Superficie Instalación del TweeterMontaje AL RAS Especificaciones Instalación DEL CrossoverCaracterísticas Deutsche SO Platzieren SIE DIE LautsprecherTüreinbau Einbau IM KofferraumOberflächeneinbau Einbau des HochtönersBündiger Einbau Daten Installation DER CROSSOVER-EINHEITEigenschaften Installazione DEI MIDRANGE/WOOFER ItalianoMontaggio Sulle Portiere Montaggio NEL Piano Portaoggetti PosterioreMontaggio a Superficie Installazione del tweeterMontaggio a Filo Dati Tecnici Installazione DEL CrossoverCaratteristiche Português Determinação DOS Locais Para Instalação DOS ALTOS-FALANTESInstalação NAS Portas Instalação no Painel TraseiroInstalação NA Superfície Instalação do tweeterInstalação Embutida Instalação do Crossover EspecificaçõesWarranty

CO552, CO652 specifications

Directed Electronics has long been a prominent name in the automotive security and remote start systems industry. Among its innovative offerings, the CO652 and CO552 models stand out due to their advanced features and user-friendly technology. Both models are designed specifically to enhance vehicle security and provide convenience for the driver.

The CO652 is known for its robust security features, which include a two-way remote communication system. This enables users to receive confirmation on their remote that their vehicle has been securely locked or that the alarm has been triggered. This two-way communication is invaluable, providing peace of mind that the vehicle is protected while allowing users to easily monitor its status. Additionally, the CO652 includes a built-in shock sensor, which triggers an alarm if an attempt is made to tamper with the vehicle.

On the other hand, the CO552 model focuses on combining security with convenience features, making it an ideal choice for those who prioritize ease of use. It offers one-way remote communication, allowing users to lock or unlock their vehicle at the touch of a button. The CO552 also features a built-in keyless entry system and a starter kill function, which prevents the vehicle from being started without the remote, adding an extra layer of security against theft.

Both models come equipped with Directed's advanced technology, including an integrated transceiver that enhances range and reliability. Users can engage their vehicle's functions from considerable distances, making it perfect for various situations, such as starting the engine from indoors on a cold day or ensuring the vehicle is locked when a user is in a crowded area.

The installation process for the CO652 and CO552 is designed to be straightforward, with clear instructions and compatibility with a range of vehicles. The systems are also designed with features that maximize user customization, allowing users to tailor the settings to their preferences.

In summary, the Directed Electronics CO652 and CO552 models exemplify the perfect blend of security and convenience. With advanced technologies, user-friendly features, and robust security characteristics, these systems are ideal for vehicle owners looking to enhance their vehicle's protection while adding modern conveniences.
Top Page Image Contents