Directed Electronics A802, A1004, D2205 owner manual LED Tube Installation Optional

Page 20

LED TUBE INSTALLATION (OPTIONAL)

This Directed Audio amplifier has been designed with a custom heat sink that can accommodate two (optional—not supplied) VARAD LED tubes.

1.Before installing the LED tubes, remove and discard the mounting feet from the VARAD LED tubes.

2.Slide each LED tube assembly into your Directed Audio amplifier heat sink. Ensure that the LEDs are facing out for optimal visibility. The wires from the LED tube assembly should be on the signal input end of the amplifier. The Black wire from the LED tube is ground and the Black/White wire from the LED tube is power.

4.Run the two wires from the tube assembly and connect them to the 4-pin LED/FAN input connector. Refer to the LED/FAN harness diagram given earlier in this manual.

NOTE:

If the optional fan IS NOT being used, it is recommended that the second LED tube be wired to this circuit. If the optional

 

fan is being used, it is recommended that the second LED tube be wired in parallel with the first LED tube.

Use the following cross reference chart to select the proper length VARAD LED tube for use with your Directed Audio amplifier.

Directed Amplifier—VARAD Cross Reference Chart

Directed Part Number

Directed Model

VARAD Model

QTY Required

 

 

 

 

45120

A502

HLX6, HL6, HLW9

2

45125

A802

HLX6, HL6, HLW9

2

 

 

 

 

45150

A404

HLX6, HL6, HLW9

2

 

 

 

 

45155

A1004

HLX12, HL12, HLW15

2

 

 

 

 

45095

D600

HLX6, HL6, HLW9

2

 

 

 

 

45100

D800

HLX6, HL6, HLW9

2

 

 

 

 

45105

D1200

HLX6, HL6

2

 

 

 

 

45110

D2400

HLX12, HL12

2

 

 

 

 

45165

D2205

(2) HLX12, (2) HL12

2 or 4

 

 

 

 

20

© 2004 Directed Electronics, Inc

Image 20
Contents A802 A1004 D2205 Table of Contents CongratulationsLimited TWO-YEAR Consumer Warranty Features „ Switchable 8 dB bass EQ functionBitwriter module with Audio programming „ Unity gain pass through RCA jacksInstallation Guidelines Front Panel CONNECTIONS/STATUS LED Line Out Switch D2205 three positions Sub Gain subwoofer channel gain adjustmentA802 A1004 D2205 Rear Panel Connections ESP Features and Controls Amplifier Connections RearReserved no function, reserved for future use To perform a transmitter learn Default mode is UnlockedLearn TX IDs ESP Status Indicator Mode Green Solid Red Normal Operation FlashingOvervoltage RedSpeaker Wiring Diagrams A802/A1004 Speaker Wiring Diagrams D2205 Front/Rear Bridged operation top view Subwoofer operation top view Crossover Settings and Gain Adjustment LED Tube Installation Optional Directed Amplifier-VARAD Cross Reference ChartSubsonic Filter Adjustment D2205 only CEA SpecificationsSpecifications Directed Electronics, Inc Vista, California

A802, D2205, A1004 specifications

Directed Electronics has established itself as a leader in the automotive electronics industry, offering a wide range of products designed to enhance vehicle security and convenience. Among their notable offerings are the D2205, A802, and A1004, which showcase cutting-edge technologies and features designed to protect vehicles effectively.

The Directed Electronics D2205 is a premium remote start system that combines convenience with advanced security features. This system boasts a high range of operation, allowing users to start their vehicles from a significant distance, making it perfect for chilly mornings or hot summer days. One of its standout features is the two-way communication capability, which provides feedback to the user about the vehicle’s status, such as whether the engine is running or if the doors are locked. The D2205 also includes various programmable features that allow users to customize their experience, including the ability to set engine runtime, adjust remote start settings, and even add additional functionalities like keyless entry or trunk release.

The A802 model is designed primarily for alarm and security. It integrates several advanced technologies such as a shock sensor, which detects any unauthorized tampering or movement, triggering audible alerts to deter potential thieves. The A802 also includes a built-in interface for remote start integration, meaning users can combine the security features with remote ignition functionality. Its ease of installation, coupled with support for a wide range of vehicles, makes it a versatile choice for enhancing automotive security. The A802's remote key fob allows users to arm and disarm the system from a distance, adding an extra layer of convenience to vehicle access.

Finally, the Directed Electronics A1004 represents a robust solution in the realm of vehicle security systems. This model features a compact design, making it easy to install without compromising on performance. It is equipped with multiple zone protection, offering a comprehensive security solution that includes perimeter and motion sensors. The A1004 also facilitates passive or active arming options, providing users with flexibility in how they secure their vehicles. Additionally, this system can be integrated with other Directed Electronics products, enabling a more cohesive security approach tailored specifically to user needs.

In summary, Directed Electronics has developed exceptional products like the D2205, A802, and A1004, which reflect their commitment to innovation and quality in vehicle security and convenience. Each model showcases advanced technologies and features aimed at enhancing user experience while ensuring maximum vehicle protection.