USER’S MANUAL
3. OSD Tone
Press the up( | ) / down( ) button to select the OSD | Press the up( ) / down( ) button to select the |
tone menu. |
| desire OSD Tone. |
Press the right( | ) or ENTER button | Press the MENU button to save. |
4. Blue Screen
Press the up( | ) / down( ) button to select the blue | Press the up( ) / down( ) button to select on or off. |
screen. |
| Press the MENU button to save. |
Press the right( | ) or ENTER button. |
|
5. Key Lock
Press the up( | ) / down( ) button to select the key | Press the up( ) / down( ) button select on or off |
lock menu. |
| Press the MENU button to save. |
Press the right( | ) or ENTER button |
|
USER’S MANUAL
MOUNTING GUIDE
Wall mountable using two methods:
1)Using the 200 mm
2)Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall.
Wall
Pad
Arm
Monitor
D-SUB CONNECTOR PIN ASSIGNMENTS
• PIN ASSIGNMENTS
Pin 1 | RED VIDEO | Pin 9 |
|
|
Pin 2 | GREEN VIDEO | Pin10 | SIGNAL CABLE DETECT |
|
Pin 3 | BLUE VIDEO | Pin 11 | GROUND |
|
Pin 4 | GROUND | Pin 12 | SAD(for DDC) |
|
Pin 5 | GROUND | Pin 13 | ||
Pin 6 | RED GROUND | Pin 14 |
| |
Pin 7 | GREEN GROUND | Pin 15 | SLC(for DDC) |
|
Pin 8 | BLUE GROUND |
|
|
|
|
|
|
|
|
• ACCESSORY
1. POWER CORD | 2. USER’S MANUAL | 3. PC cable | 4. Adaptor |
5. Remote Control | 6. Batteries | 7. Wall mount (Option) | 8. Rack mount (Option) |
12 |
|
|
| 13 |
|
|