Installation Installation Considerations

INSTALLATION

INSTALLATION CONSIDERATIONS

The following is a list of tools needed for installation:

Volt/Ohm Meter Wire strippers Wire crimpers Wire cutters

#2 Phillips screwdriver Battery post wrench

Hand held drill w/assorted bits 1/8" diameter heatshrink tubing Assorted connectors

Adequate Length—Red Power Wire Adequate Length—Remote Turn-on Wire Adequate Length—Black Grounding Wire

This section focuses on some of the vehicle considerations for installing your new Amplifier. Pre- planning your system layout and best wiring routes will save installation time. When deciding on the layout of your new system, be sure that each component will be easily accessible for making adjustments.

!CAUTION: If you feel unsure about installing this system yourself, have it installed by a qualified technician.

!CAUTION: Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

Before beginning any installation, follow these simple rules:

1.Be sure to carefully read and understand the instructions before attempting to install the Unit.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your Source Unit in place.

4.Route all of the RCA cables close together and away from any high current wires.

5.Use high quality connectors for a reliable installation and to minimize signal or power loss.

6.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

7.Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.

8.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

9.ALWAYS protect the battery and electrical system from damage with proper fusing. Install the appropriate fuse holder and fuse on the +12V power wire within 18” (45.7 cm) of the battery terminal.

10.When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

MOUNTING LOCATIONS

The mounting position of your amplified subwoofer will have a great effect on the sound performance produced.

Engine Compartment

Never mount this unit in the engine compartment. Mounting the unit in the engine compartment will void your warranty.

550X, 750X specifications

Rockford Fosgate has long been a leader in the audio industry, renowned for its innovative designs and high-quality sound products. The Rockford Fosgate 750X and 550X amplifiers are prime examples of this legacy, delivering superior performance for car audio enthusiasts.

The Rockford Fosgate 750X amplifier is particularly noted for its impressive power output, delivering up to 750 watts of peak power. This makes it ideal for powering larger subwoofers or multiple speaker setups, ensuring that users experience robust bass and clear sound in any vehicle. The amplifier features adjustable gain control, allowing users to fine-tune their system for optimal performance. Additionally, the 750X boasts a built-in variable low-pass crossover, which helps to channel the appropriate frequencies to the subwoofers, enhancing overall sound quality while minimizing distortion.

On the other hand, the Rockford Fosgate 550X amplifier offers a slightly lower power output of 550 watts. This amplifier is perfect for users who require ample power without the need for an overwhelming system. The 550X also includes adjustable gain control and a variable low-pass crossover, allowing for customization to suit individual preferences and vehicle acoustics. Both models are designed with an emphasis on ease of installation, featuring a compact design and high-quality connectors.

One of the standout technologies found in both the 750X and 550X amplifiers is the Class-D amplifier design. This technology not only improves power efficiency but also reduces heat production, making these amplifiers sustainable for long-duration use. Additionally, Rockford Fosgate incorporates their unique Power Line output, which provides reliable signal transmission without significant loss in quality.

Both amplifiers also come equipped with a robust thermal management system to prevent overheating during intense playback. Additionally, built-in circuit protection features ensure that the amplifiers remain safe during operation, offering peace of mind to users.

In summary, the Rockford Fosgate 750X and 550X amplifiers are excellent choices for car audio enthusiasts looking to enhance their sound experience. With impressive power outputs, adjustable controls, and advanced technologies, these amplifiers stand out in the competitive audio market, providing the performance and reliability that Rockford Fosgate is known for. Whether you’re a casual listener or an audio aficionado, these amplifiers are sure to satisfy your sound cravings.