Please Note, Electrical Installation | Pyramid Car Audio PB 610 SX

ELECTRICAL INSTALLATION

PYRAMID SERIES

1.Connect the power ground terminal to the nearest point on the chassis of the car keep this ground wire less than one meter(39") in length. Use #8 wire.

2.Connect the remote terminal to the remote output of the head unit using #14 wire.

3.Connect an empty fuse holder within 300mm (12") of the battery and run a #8 or larger high quality cable from this fuse to the amplifier location.

4.Make sure there is no fuse in the fuse holder. Then make the connec- tion to the "BATT" connection on the amplifier.

5.If multiple amplifiers are being used, either run separate cables. (each with its own fuse at the battery) or a #0 or #2 cable from the fuse holder at the battery to a distribution block at or near the amplifier's location.

6.Connect all line inputs and outputs using high-quality RCA-RCA cables.

7.Insert fuse(s) at the battery fuse holder(s).

8.Recheck all connections before powering up.

9.Set all level controls to their least sensitive positions and set all crossover controls, switches, etc. to the desired frequency or position.

10.Once the system is powered up, set the volume control on the head unit to about the 2 o'clock position, and then set all the amplifiers, level control for maximum sound pressure.

11.When bridging the amplifiers be sure to change the stereo/mono switch knob to the in position for the appropriate channels to bridge.

12.Further fine turning of the various controls may be necessary to obtain the desired results.

PLEASE NOTE:

The gain control of any car audio amplifier should not be mistaken for a volume control. It is a sophisticated device to match the output level of your source unit to the input level of the amplifier. Do not adjust the level to maximum unless your input level requires it. Not following this instruction will result in an input overload to the amplifier and high levels of distorted musical reproduction.

-13-

PB800SX, PB 610 SX, PB1000, PB310SX specifications

Pyramid Car Audio has made a name for itself in the automotive audio industry, providing a range of high-quality products that enhance the listening experience while on the road. Among its offerings, the PB310SX, PB1000, PB610SX, and PB800SX stand out with their impressive features, technologies, and characteristics tailored for car enthusiasts.

The Pyramid PB310SX is a versatile amplifier boasting a maximum power output of 3,100 watts. One of its key features is the advanced circuit design, which ensures optimal performance and minimal distortion. The amplifier is equipped with built-in LED indicators, allowing users to monitor performance levels easily. The adjustable gain control provides flexibility, enabling users to customize their sound according to personal preferences. The durable build quality of the PB310SX ensures longevity, making it a reliable choice for those who crave powerful audio in their vehicles.

Moving on to the PB1000, this model emphasizes compact design without compromising on sound quality. With a peak power of 1,000 watts, it's perfect for smaller setups where space is limited. The PB1000 utilizes MOSFET technology, which enhances efficiency and reduces heat generation during operation. The low-pass and high-pass filters ensure that the audio output is clean and crisp, allowing users to enjoy their favorite tunes without muddiness. Its sleek design also makes it an aesthetically pleasing addition to any car audio system.

The PB610SX offers a commendable balance between power and performance, with a peak power rating of 610 watts. This amplifier is designed for easy installation, featuring a compact form factor and user-friendly controls. It also includes a built-in crossovers system that enhances the separation of sound frequencies, allowing for more precise audio reproduction. Additionally, the PB610SX is equipped with short-circuit protection, ensuring safety against potential damage.

Lastly, the Pyramid PB800SX presents a compelling option for those seeking reliable power. With a maximum output of 800 watts, it is designed to deliver a robust audio experience. The amplifier includes RCA inputs, making it versatile for various audio setups. Its adjustable bass boost enhances low frequencies, allowing for a richer listening experience. The heatsink design helps dissipate heat effectively, prolonging the lifespan of the amplifier under heavy use.

In summary, Pyramid Car Audio's PB310SX, PB1000, PB610SX, and PB800SX amplifiers each bring unique features and technologies to elevate any car audio system. Whether you prioritize power, compactness, or enhanced audio control, these models offer reliable performance and exceptional value, making them a popular choice among car audio enthusiasts.