RCA DRC220N manual Setup and Connections, Connection DVD + TV

Back of TV (example)

VIDEO	AUDIO	S-VIDEO	CABLE/ANTENNA
	L	R

- OR -

Chapter 1: Setup and Connections

Connection: DVD + TV

CABLE

OR

OFF-AIR SIGNAL 1. Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV (sometimes labeled AUDIO IN

L and R).

2. Connect the video cable.

A. Basic video connection – Connect the video cable (yellow)

AUDIO

OUT

R

OUT S-VIDEO

L

Y

Pb Pr

DIGITAL AUDIO OUT

OPTICALCOAXIAL

to the VIDEO OUT jack on the back of your DVD Player, and to

the Video Input jack on your TV (sometimes labeled VIDEO IN).

– OR –

B. S-Video (optional) – If your TV has an S-Video jack,

connect an S-Video cable (not provided) to the S-VIDEO OUT

VIDEO OUT

Back of DVD Player

The back of your TV and VCR might look different than the ones pictured here.

Details about the different kinds of cables used to connect your DVD player are on page 56.

jack on the back of your DVD Player and to the S-VIDEO jack

on your TV.

Note: If your TV has component video (Y, Pb, Pr) jacks, use video- grade cables (not provided) to connect the TV to the DVD player (Y to Y, Pb to Pb, etc.). It is essential to match the color coded connectors with a compatible TV.

3.Connect the AC power cord into an AC outlet.

4. Connect your cable or off-air antenna to your television as you normally would. You may need to consult your television manual for details.

Go to page 8

5