Customizing the Function Settings
MISC
Use Default Settings
1. Press the SETUP button in stop mode.
2. Press the 
/ 
button to select Misc.
3.Press the 
button, then press the 
/ 
button to select
“Use Default Settings” dialogue box.
4. Press the ENTER button, then press the 
/ 
button to select “Yes”. Press the ENTER button and the original setting will be restored. The unit will exit the default setting menu automatically and
Note: It will take
Screen Saver
1. Press the SETUP button in stop mode.
2. Press the 
/ 
button to select Misc.
3. Press the 
button, then press the 
/ 
button to select Screen Saver.
4. Press the ENTER button, then press the 
/ 
button to change the On/Off mode.
5.Press the ENTER button.
6.Press the SETUP button or RETURN button to exit the menu.
Maintenance
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out during playback. Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
•Do NOT expose the disc to direct sunlight or excessive heat.
•Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
•NEVER use solvents such as benzine or alcohol to clean the disc.
•Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause malfunctions.
Cleaning the Unit
•Be sure to turn the unit off and disconnect the power source before maintaining the unit.
•Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been dipped in a weak
•Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to remove dust.
Important Note
• Before transporting the unit, remove any disc from the disc compartment.
20
ENGLISH
IB.indd 20
6/24/2009 10:19:18