Using the TV’s Menu System
SETUP |
|
Go Back |
|
Auto Ch. Search | < > ... |
List & Labels | ... |
Closed Caption | ... |
Favorite CH | ... |
Language | English... |
Format | 4:3 |
AUTO CHANNEL SEARCH
Go Back |
|
|
Signal Source | < > | Digital... |
Digital Signal Type |
| Cable... |
Start |
| ... |
Search percent |
| 0 |
Digital Channel |
| 0 |
AUTO CHANNEL SEARCH menu for digital signals.
Setup Menu
Auto Ch. Search (Auto Channel Search) Allows you to choose your signal type and begin an Auto Channel Search.
Press the left or right arrow button to choose among the signal sources below:
•Both If you have connected both coaxial inputs on the back panel of your TV, you can choose to do your Auto Channel Search on both connections at one time by making this choice. Refer to page 5 for a complete explanation of these connections.
•Digital Choose if you are connected to the ANTENNA/CABLE DIGITAL INPUT jack.
•Analog Choose if you are connected to the ANTENNA/CABLE ANALOG INPUT jack.
Now use the down arrow button to choose a signal type.
•Digital Signal Type Choose between Cable or Antenna if you are connected to the ANTENNA/CABLE DIGITAL INPUT jack. If you chose Both above, then you’ll need to choose a signal type for your digital and analog connections.
•Analog Signal Type Choose between Cable or Antenna if you are connected to the ANTENNA/CABLE ANALOG INPUT jack. If you chose Both above, then you’ll need to choose a signal type for your digital and analog connections.
After you have made the selections above, use the down arrow button to highlight Start.
•Start Press the right arrow button to start the search. Searches for channels the TV is receiving and stores them in the channel list. Go to page 11 (Auto Channel Search) for more information.
•Search percent Number displayed indicates how much of the search has been completed on a digital signal.
•Analog Channel Shows the channel numbers as they are being searched.
•Digital Channel Shows the number of channels found as they are being searched.
28 | Chapter 3 |