Basic Operations

Resetting

*In case the unit does not operate normally, press the [RESET] button with a pointed object to restart the operation when the power of the unit is on.

*Pressing the [RESET] button will turn off the power. Press the [MODE/POWER] button to turn power on.

*When the screen shows touch key [RADIO] on another mode, change the mode to radio mode and then return to the original mode.

Turning On the Power

Press the [MODE/POWER] button shortly to switch on the unit,

When the power of the unit is off, pressing the [OPEN/CLOSE] button will turn on the power and the monitor will automatically open.

Turning Off the Power

Press the [MODE/POWER] button for more than 2 seconds again to switch off the unit.

*When the monitor is open, pressing the [OPEN/CLOSE] button will close the monitor and video is off, but sound is still working.

*When the monitor is open, pulling out the car key (ACC OFF) will turn off the power and close monitor automatically.

Selecting a Mode

1.Press the [MODE/POWER] button shortly to change the mode of operation. 2.Each time this button is pressed, the mode switches in the following order

RADIO -> CDC (DVDC) -> DVD -> TV -> NAVI -> AV1 -> AV2 -> RVC -> RADIO

*[OFF] or [NONE] for set up CDC, AV1, AV2, RVC is selected, thoes modes do not appear on the monitor .

Adjusting the Volume

Press the Volume [] or [] button on any mode to adjust the volume.

The volume level is indicated in the monitor from 0 (minimum) to 50 (maximum).

While driving, Keep the volume level at which external sounds can be heard.

Mute On/Off

Each time the [MUTE] button is pressed, mute is turned on and off.

Opening the Monitor

Press the [OPEN/CLOSE] button. The monitor comes out and stand up automatically.

*When the unit is off, pressing the [OPEN/CLOSE] button will turn on the power and the monitor will be automatically opened.

*If the monitor touches an obstacle while it is opening or closimg, the monitor will stop moving or close. Close the monitor after removing the obstacle.

*Do not touch the monitor when it is opening or closing. Doing so may damage the unit. *To prevent the battery from going dead, operate this unit with the engine running.