2. LISTEN TO FM RADIO
Connect the supplied FM antenna to FM ANT jack on the rear of the unit as the figure below. Extend the wire and relocation it to get the best reception.
1)Press POWER button on the unit to tum the unit to standby mode.
2)Press STANDBY button on the unit or POWER button on remote control to turn on the unit.
3)Press INPUT button on the unit or remote control repeatedly until FM frequency appears on the display.
4)Press .... or ~ button on remote control repeatedly to search the specific radio stations. (AUTO SEARCH: Press and hold .... or ~
button for about 2 seconds and then release the button, the unit will auto search the next available radio station then stop. Repeat above procedure to search other available radio stations. )
5)To store the current received radio station into the memory. Press
ENTER button on the remote control, CH 01 will appear on the display. Press .... or ~ buttons repeatedly to select channel number as desire. Press ENTER button again to stored the current radio station to the selected channel.
6)To listen the preset channels, press .... or ~ buttons on the remote control repeatedly until the desired channel appear on the display.
7)Press the R1L button on the remote control repeatedly to select stereo or mono as desire. STEREO or MONO will appear on the display.
3. HD MEDIA PLAYER OPERATION
Before connecting USB flash drive or SO cards please make sure they are in right direction. Refer following figure.
\ IBBBSI··
Play Video Music and Photo
1)Press power switch ,then press STANDBY button on the unit or POWER button on remote control to turn the unit to standby mode.
2)Unit acquiesce enter HD mode(Media play mode) when turn on the unit. Interface as below:
There are five mode: Movie,Picture,Music,Setting,Explore. Press <II and ~ button to choose mode, press ENTER button to enter each mode