LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
1.POWER ON/OFF CONTROL
Press the button to turn the power “ON” or “OFF”.
Note : The unit can be turn on by pressing any keys on the panel (except panel release button & disc eject button). It will help the user who cannot find the power button in dark.
2.BAND SELECTOR
Each time this button is pressed, the radio band is changed. The indication “FM1”, “FM2”, “FM3”, “MW1” or “MW2” will appear on the display according to your selection.
3.SCAN CONTROL
Press this button to scan the receivable FM / MW stations. When receivable stations are tuned in, they are monitored for approximately 5 seconds before advancing to the next receivable station. Press SCAN button once again to stop scanning as desired.
4.PRE-SCAN/AUTO-STORE BUTTON
This button allows you to enjoy “Preset Memory Scan” function by pushing it shortly, and
*PS (PRESET MEMORY SCAN ) - It calls the memorized station frequencies ( from
*AS
5.DISC SLOT
Holding the disc and insert into the disc slot. The CD mechanism will automatically engage into CD play mode.
6.LCD DIGITAL DISPLAY
The unit utilizes a digital type display which shows numerical indication of station FREQUENCY and other FUNCTIONS.
7.CLOCK CONTROL
During radio and CD operation, press this button to call the time display on the incorporated quartz clock.
SETTING CLOCK TIME
1.Press CLOCK button and hold it until the display flash and release.
2.Press “+” button to set HOUR and press
8.STEREO/MONO CONTROL
Press this button to select “FM STEREO” or “MONO” reception.
9.EJECT BUTTON
Press the button to eject the disc inside disc slot.
Page. 2
P / N :