PYLE Audio PLDVD65IN owner manual Trouble Shooting

Page 30

TROUBLE SHOOTING

If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked.

Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player.

NO POWER

Check if the on/off button on the front of the player is set to on.

Check if AC or DC power plug of the mains unit is properly connected. Check if there is power at the AC or DC outlet.

NO PICTURE

Check if the mode it set to proper state, such as DVD mode, AV1 mode, AV2 mode and RGB mode. Check the video connection.

DISTORTED PICTURE

Check the disc for fingerprints and clean with soft cloth, wiping from centre to edge.

Sometimes a small amount of picture

distortion may appear. This is not a malfunction.

THE PICTURE IS OVER DARK, OVER BRIGHT OR HAS NO COLOR

Press PICTURE button on the monitor panel, then press VOLUME+ button VOLUME- button to increase or decrease the level of the corresponding item (BRIGHT, CONTRAST,COLOR or TINT)to proper value, then you can get an optimum picture effect.

COMPLETELY DISTORTED PICTURE

The disc format is not according to the TV-set used (NTSC).

NO COLOR IN PICTURE

The disc format is not according to the TV-set used (NTSC).

DISC DOES NOT PLAY

Ensure the disc label is upwards.

Clean the disc.

Check if the disc is defective by trying another disc.

NO SOUND

Check audio connections.

If using a HIFI amplifier, try another sound source.

Check if the volume is minimum, and adjust the VOLUME+ to increase the volume level.

DISTORTED SOUND FROM HIFI AMPLIFIER

Check to make sure that no audio connections are made to the amplifier phono input.

NO RETURN TO START-UP SCREEN WHEN DISC IS REMOVED

Press POWER to turn off the unit, then press it again to turn on the unit. Press reset button on the front of the DVD unit.

THE PLAYER DOES NOT RESPOND TO THE REMOTE CONTROL

Aim the remote control directly at the sensor on the front of the player.

Avoid all obstacles which may interfere with the signal path.

Inspect or replace the remote control batteries.

DISTORTED OR B/W PICTURE

The disc format is not according to the TV-set used (NTSC).

NO AUDIO AT DIGITAL OUTPUT

Check the digital connections.

Check the Digital Audio menu to make sure that the digital output is correctly set.

30

Image 30
Contents Mobile Video System DVD/CD/MP3Contents Features Compatible with Ntsc DVD Video CDUSE this Product Safely Safety Information Region Management InformationVideo CD Disc NotesDVD MP3Installing the unit InstallationInstallation Opening DIN FRONT-MOUNT Method aRemoving the unit DIN FRONT-MOUNT Method B When the monitor stretching out PlayerFront View Back View Electrical Connection Remote Control Location and Function of KeysEject SetupVOLUME+ SubtitlePreparing the Remote Control Using the Remote ControlInserting the Batteries LOADING/EJECTING a Disc Loading a DiscEjecting a Disc Basic Operation Open/Close the Monitor and Angle AdjustmentOperation Turnig the player on/offReset Volume Level AdjustmentMode Selection Picture mode AdjustmentDisc DVD, VCD, CD, MP3 Operation For CD/VCD with PBC OFF On-Screen Display FunctionDisc Search Goto ZoomVCD Title Menu Function For DVD only Multi-audio Language FunctionMenu Function For DVD Only Multi-subtitle Language Function For DVD onlyFolder REP Smart navigation MP3 Disc PlayREP-ONE FolderSetup Initial SetupGeneral Setup OSD Lang type setup PIC mode setupAngle Mark display setup Captions setupSCR Saver setup Audio SetupSpeaker Setup OP ModeAudio language setup Preferences SetupTV type setup Dynamic Range ControlPassword Subtitle language setupDisc Menu language setup ParentalDefaults Smart NAVDefaults Table AutoTrouble Shooting Buttons do not Work Specifications 88-V1952-02