Touch Screen Operation
Touch the AF section on touch screen or swing and keep the SEL knob in the TA/AF direction for about 2 seconds , theAF function is activated. The AF symbol appears in the display .
When the AF function has been switched on, the radio continuously tests the signal strength of the AF frequency . The test interval for each AF frequency depends on the signal strength of the current station and varies from a few minutes in the case of weak signals. Whenever the newAF frequency is stronger than the station that is currently tuned in , the radio switched to this frequency for a short time for a short time and the message
"NEW FREQUENCY " is displayed for one or two seconds.
Note:
the status of the AF function is shown by an AF symbol in the display.
• If the AF symbol appears in the display, the AF function is switched on and RDS transmission date is being received .
• If the AF symbol flashes in the display, the AF function is selected but no RDS signal can be received at the moment .
PTY FUNCTION
In Radio mode, touch screen of"PTY " range to select the Program type .
In Radio mode, touch screen of"PTY " range to select the Program type .
PTY Selection of the program type besides the stations name, some FM stations also transmit information on the type of program . This information can be displayed by your car radio .
Examples of such types of program are :
SPORT NEWS POP WEATHER......
With PTY function you can specifically select stations transmitting ",particular type of program. Touch the PTY range on screen repeatedly to call up the PTY selection menu . The message
"PTY SEEK" then appears briefly in the display .
When PTY has been selected the radio starts searching for corresponding PTY information and stops when the PTY information has been found, "NO PTY" appears in the display. If the PTY information being searched for no longer exists, the PTY function automatically switches to normal mode .
ill' .
,
i i
i!
,
!
iI'I