PYLE Audio PLD58MUT owner manual Detaching The Control Panel, Install The Front Panel

INSTALLATION

How To Remove And Install The Front Panel

When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder.

Detaching The Control Panel

Before detaching the control panel, be sure to turn off the power.

1.Press the release button and the left hand side of the front panel will release. (FIG. 1)

2.Pull-off the front panel (FIG. 2) and keep the front panel into the case (FIG. 3)

Install The Front Panel

First insert the right hand side of the front panel into the housing of the unit , then push the left hand side of the front panel and make sure the panel is properly installed(FIG.4),and then press the PWR button (2) briefly to switch the device ON.

FRONT PANEL FRONT PANEL

RELEASE BUTTON
FIG.1	FIG.2
PROTECTIVE CASE	Installing The Front Panel

FIG.3 FRONT PANEL FIG.4

6