Radio Operation, Listening to the Radio

Radio Operation

Listening to the Radio

Switching To Radio Mode

	MOD	Repeatedly Touch the MOD
	MOD	section on the touch screen to
		section on the touch screen to
		select the RADIO mode.
		(You can press the MOD button
		on front panel to select the
		Radio mode .)

the following information will appears on the monitor :

FM1		87.5 MHZ		CH6
ST	DX		DISC-IN
SWF		POP		11:08 AM
1		2	3	MOD
4	5	6	BND

Selecting The Frequency Band

	BND	Touch the BND section on the
	BND	touch screen repeatedly to
		touch screen repeatedly to
		select the band , screen band
		will show in turn :

(You can also press the BND on front panel repeatedly to select the band .)

FM1 FM2 FM3

AM2(MW2) AM1(MW1)

Start Searching For a Station

Manual Search

Touch briefly the “ ” section on the screen (or swing briefly the

SEL knob in direction) to increase frequency by one step of channel spacing .

Touch briefly the “ ” section on the screen (or swing briefly the

SEL knob in direction) to decrease frequency by one step of channel spacing .

Automatic Search

During Radio mode, swing and hold (for about 2 seconds )the SELknob in

/direction (or touch the / section long) to start search for a radio station automatically .

Storing Stations In Memory

Setting Memory

Press the /CH 1-6 button repeatedly on the front panel to preset stations at radio mode . ( Or touch the screen the 1 / 2 / 3 / 4 / 5 / 6 sections)

FM1		98.10 MHZ		CH6
ST	DX		DISC-IN
SWF		POP		11:08 AM
1		2	3	MOD
4	5	6	BND

Touch to preset station

With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band.

The operation is as below :

-Store in Memory

Touch and keep the 1-6 sections

(or press and hold the /CH 1-6) for about 2 seconds, the current listening station will be stored into the number location .

-Retrieve a preset station

Touch the 1-6 sections briefly (or press the /CH1-6 button repeatedly) to retrieve a station which had been stored in the memory in advance the chose number is shown on display .