Rockford Fosgate ND4-XFM, ND8-XFM owner manual Replacing the ND4/ND8 Dome, Disassembly Reassembly

Page 10

REPLACING THE ND4/ND8 DOME

Disassembly

Reassembly

both the ND4 and ND8.

1.Gently remove tweeter assembly from mounted location.

2.Disconnect the tweeter wire harness, at the .110 Fastons end, from the filter network wire har- ness.

3.Remove the "strain relief clip" from the back of the tweeter assembly.

4.Carefully grasp one of the wires leading into the Magnet Enclosure and gently pull it straight out. Repeat for the other wire.

5.Carefully remove the replacement Coil/Dome Assembly from the Transport/Tool.

6.Insert the spanner wrench detail of the Trans- port/Tool into two of the holes located on the bottom of the Magnet Enclosure. While holding the tweeter assembly firmly in one hand, un- screw the Magnet Enclosure until the Enclosure shell can be lifted off cleanly.

7.Place the Magnet Enclosure on a flat, hard surface. Gently insert the tip of a sharp, pointed object under the edge of the Adhesive Ring and lift up. The entire Coil/Dome Assembly should lift out cleanly. If it does not, re-insert a sharp, pointed object under the attached Gasket and lift up.

8.Clean off any excess adhesive from the Magnet Enclosure.

1.Grasp the replacement Coil/Dome Assembly with your thumb and forefinger, and extend the protruding voice coil wires such that they extend straight down from the Coil/Dome Assembly.

2.Hold the Magnet Enclosure with your free hand, and line up the polarity dot on the Gasket with one of the holes marked with a "+" on the Magnet Enclosure. Slowly insert the wire into the hole on the Magnet Enclosure. Once the wire enters the hole, insert the other wire into the opposite hole marked with a "–", and bring the two pieces together, being very careful not to touch the

7

Image 10
Contents Neodymium Tweeter Practice Safe Sound Table of Contents Specifications ND4-XFM/ND8-XFM Neodymium Tweeter ContentsDesign and Features IntroductionND4 and ND8 Neodymium Tweeters Flush Mounting the ND4 /ND8 Tweeters Front View Back ViewSurface Mounting the ND4 /ND8 Tweet ERS Wiring the ND4/ND8 Neodymium Tweeter Disassembly Reassembly Replacing the ND4/ND8 DomePage ND4/ND8 Neodymium Assembly Diagram Warranty GeneralRockford Fosgate

ND8-XFM, ND4-XFM specifications

Rockford Fosgate, a prominent name in the audio industry, has added to its impressive lineup with the introduction of two exciting new models: the ND4-XFM and ND8-XFM. These high-performance speakers cater to audio enthusiasts who demand exceptional sound quality and reliability.

The ND4-XFM is a 4-inch full-range speaker designed for those who seek crisp highs and strong midrange audio without the bulk. One of its main features is the advanced woofer design, which integrates a polypropylene cone with a rubber surround to ensure long-lasting durability and excellent performance. This combination delivers a remarkable audio experience with minimal distortion, making the ND4-XFM perfect for both mobile and home audio setups. Further enhancing its sound quality, the speaker employs a high-efficiency design that maximizes power handling and minimizes energy loss, allowing it to produce clearer audio even at higher volumes.

On the other hand, the ND8-XFM is an 8-inch full-range speaker that packs a powerful punch. It is ideally suited for users who require deeper bass response along with the crisp highs and rich midrange characteristic of Rockford Fosgate products. The ND8-XFM features a high-quality composite cone, which not only boosts its structural integrity but also allows for better bass reproduction, making it a suitable choice for both music and movie applications. Like its smaller counterpart, the ND8-XFM utilizes a rubber surround for improved resilience and longevity, ensuring that it stands the test of time even under demanding conditions.

Both models incorporate Rockford Fosgate's proprietary technologies, such as advanced cooling systems to prevent overheating and enhance performance during extended use. The innovative designs of both the ND4-XFM and ND8-XFM also include a robust enclosure that minimizes vibration and resonance, contributing to clearer sound production.

In summary, the Rockford Fosgate ND4-XFM and ND8-XFM speakers embody cutting-edge audio technology, exceptional durability, and versatility, making them ideal choices for users who value high-quality sound reproduction. With their advanced features and thoughtful engineering, these speakers are sure to elevate any audio experience, whether in a vehicle or at home. Audio enthusiasts can trust Rockford Fosgate to deliver the performance they expect and deserve.