Radio Operation

OPERATION

•SWITCHING TO RADIO MODE Press MODE button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency.

•SELECTING THE FREQUENCY BAND

At radio mode, press BND/LOU (ENT) button (13) shortly to select the desired band.

The reception band will change in the following order:

FM1FM2FM3AM

•SELECTING STATION

Press button (17) or button (16) shortly to activate automatic seek function. Press for several seconds until “MANUAL” appears on the display, the manual tuning mode is selected. If both buttons have not been pressed for several seconds, they will return to seek tuning mode and “AUTO” appears on the display.

•AUTOMATIC MEMORY STORING & PROGRAM SCANNING

-Automatic memory storing

Press AMS (D-AUD)button (18) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button.

-Program scanning

Press SCAN button (25) shortly to scan preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for several seconds with release mute, then searches again.

•STATION STORING

Press any one of the preset buttons (14) (1 to 6) to select a station, which had been stored in the memory. Press this button for several seconds (until

2ND beeps come out ), current station is stored into the number button.

•LOCAL/DISTANT

Press LOC button (2) to select between local and distant stations. Local setting for reception of strong station, and a distant setting for reception of weaker stations. This function is effect during AUTO SEEK operation.

•MONO/STEREO

Press MON/ST button (1) to select mono or stereo mode. You can sometimes improve reception of distant stations by selection mono operation.

CD OPERATION

•SWITCHING TO CD MODE

If there is no CD inserted in the driver: Gently insert the CD with the printed side uppermost into the CD compartment until you feel some resistance. The CD is drawn into the driver automatically. CD playback begins.

If a CD is already inserted in the driver: Keep pressing MODE button (6) shortly until the CD mode display appears.

•SELECTING TRACKS

Press button (16) or button (17) to move to the previous track or the following track. Track number shows on display.

Hold button (16) or button (17) to fast reverse or fast forward. CD play starts from when you release the button.

•PAUSING PLAYING

Press button (20) to pause CD player. Press it again to resume play.

•PREVIEWING ALL TRACKS Press SCN button (21) to play first several seconds of each track on the current disc. Press it again to stop intro and listen to track.

•REPEATING THE SAME TRACK Press RPT button (22) to continuously repeat the same track. Press it again to stop repeat.