Radio Shack PLDVD188 specifications Optical Digital Audio Output, Wiring Connecting Socket

Page 6

	2	3	4
1,2. VIDEO OUTPUT (2 RCA jacks)
	Use an video cable to connect the video output signal to the external
	video monitors.
3.	OPTICAL DIGITAL AUDIO OUTPUT
	Use an optical audio cable to connect the digital audio output signal
	to external audio amplifier system.
4.	WIRING CONNECTING SOCKET

Firstly install the left side, then push the right side to make it combine with the unit chassis.

Image 6

Contents Specification General SpecificationsTrouble Shooting Region Management InformationContents DVD Features Main FunctionsOther Functions Temperature and Moisture Care and MaintenanceFront Panel Diagram Operation PrecautionsWiring Connecting Socket Optical Digital Audio OutputInstallation Remote Controller DiagramTV Type Multi Ntsc PAL Defaults Reset Dynamic PRO Logic Full OFF AutoLpcm Output Lpcm 48K Lpcm 96K OP Mode Dual Mono Line OUT RF Remode Stereo Mono MIX-MONO Audio OUT Analog SPDIF/RAW SPDIF/PCMDynamic Audio Setup Audio OUT OP Mode Dual MonoDefaults Lpcm OutputReset Distorted Program Setting UP SystemGlossary To Select the First TRACK/CHAPTER to Play To Scan DiscTo Play Disc in Random USE of PAD Numbers View in Different AngleTo Turn on to Play To Change the Language of the CaptionTo Pause the Playback To Stop the PlaybackTo Select Playing Contents with the Menu To END PlayingFast Forward or Reverse Playing

OPTICAL DIGITAL AUDIO OUTPUT