Amplifier Owner’s Manual
SPECIFICATIONS
SD200.2 SPECIFICATIONS
Frequency Response: Signal to Noise Ratio:
High and Low Pass Crossover: Crossover Range:
Bass Boost @ 45Hz: Low Level Input Range: Lowest Recommend Load: Typical Efficiency: Damping Factor:
±1dB from 20Hz to 20kHz >100dB
12dB per Octave 40Hz to 400Hz 0 to +18dB
200 millivolts to 8 volts
2 ohms
70%
Greater than 200
RMS Power 14.4Vdc ≤ 1% THD | 75 x 2 @ 4 ohms Stereo | |
| 100 x 2 | @ 2 ohms Stereo |
| 200 x 1 | @ 4 ohms Bridged |
Dynamic Power 14.4Vdc >1% THD | 90 x 2 @ 4 ohm Stereo | |
| 125 x 2 | @ 2 ohms Stereo |
| 250 x 1 | @ 4 ohms Bridged |
Recommended Fuse Size: | 25 amp | |
Power/Ground Wire Size: | 8 Gauge | |
Dimensions (Includes Mounting Feet): | 7.24” L x 6.93”W x 2.0” H | |
| 184mm L x 176mm W x 51mm H | |
Dimensions (Includes Terminals): | 7.36” L x 6.93”W x 2.0” H | |
| 187mm L x 176mm W x 51mm H | |
© 2011 Phoenix Gold • www.phoenixgold.com