PAC J1850 manual Parrot CK3000, Motorola IHF1000/1700

VPW	Arbitration	Class 2	J1850
1 0 0 0 1 1 1 0 1 1 1 1 0 0 1 0 0 1 1 0 1 1 0 0

Class 2 EOD J1850 CRC

1 1 1 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0

Class 2	J1850	Class 2
1 0 0 0 1 1 1 0 1 1 1 1 0 0 1 0 0 1 1 0 1 1 0 0	1 1 1 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0

Parrot CK3000

Installing the BLU-GM29 with the Parrot CK3000: If you are installing the BLU- GM29 into a vehicle that is not equipped with factory steering wheel controls, the controller that came with the Parrot MUST be used. Please see the section below on “All Other Bluetooth Kits” for hard-wiring information. Otherwise, plug the 12- pin connector on the supplied PARROT2SPLIT harness into the 12-pin receptacle on

Connection Diagram

the SPLITGM29 harness. Plug the free ends of the PARROT2SPLIT harness into the Parrot CK3000 control box. This must be done BEFORE the SPLITGM29 harness is connected to the vehicle.

Controlling the Parrot CK3000 with the BLU-GM29:

To turn Bluetooth controls on or off, press and hold the Source button on the steering wheel. After one second you will hear either one or two confirmation chimes. You MUST release the button as soon as you hear the chime. If you do not release the button within one second after the chime is heard the button will revert to it’s factory function of changing the source. One chime indicates that the Bluetooth controls are on; two chimes indicates that the Bluetooth controls are off.

When the Bluetooth controls are activated, the driver information center will display “BT Control ON”. Whenever a call is incoming or active, the steering wheel controls automatically switch to Bluetooth control. If you would like to access the features menu of the Parrot CK3000 you MUST activate Bluetooth controls before this can be done.

To Factory Radio

BLU-GM29

GM LAN 29bit Universal

Bluetooth Integration Interface

SPLITGM29 Harness

To Vehicle

PARROT2SPLIT

Harness

To Parrot CK3000

When the Bluetooth controls are de-activated or a call is ended, the driver information center will display “BT Control Off”. Once a call is ended the steering wheel controls automatically switch back to their factory functions.

Volume Control/Level Matching:

It is very important that you match the volume level of the Parrot kit to the radio. When you first install the Parrot kit with the BLU-GM29 the volume may be very loud and distorted. While in the “BT Control On” mode, the volume controls on the steering wheel will act exactly like the rotary knob on the Parrot control unit. This allows you to scroll through the Parrot menus and access the volume setting along with other features. To match the volume levels, press and hold the Source button on the steering wheel until a beep is heard. Press the “Play/Pause” button on the steering wheel, you should hear the Parrot kit’s menu prompt. Use the volume controls on the steering wheel to scroll through the choices until the Parrot kit says “Volume”. Press the “Play/ Pause” button on the steering wheel to select volume adjustment. You can now adjust the volumes and match them to an acceptable level (the radio volume must be adjusted by the volume knob on the radio).Once the volume level of the Parrot kit is set you should not have to change it again as all other volume control can be done though the radio or the phone itself.

Phone Controls

Press & hold to enable/disable Bluetooth controls

Answer Call/

Privacy Mode

Rotary Knob

Clockwise

Rotary Knob

Counter-Clockwise

End Call

Menu

Motorola IHF1000/1700

Installing the BLU-GM29 with the Motorola IHF1000/1700: Plug the 12-pin connector on the supplied MOTO2SPLIT harness into the
12-pin receptacle on the SPLITGM29 harness. Plug the free ends of the MOTO2SPLIT
harness into the Motorola IHF1000/1700 control box. This must be done BEFORE the		Connection Diagram
SPLITGM29 harness is connected to the vehicle.	To Factory Radio				To Vehicle
Controlling the Motorola IHF1000/1700 with the BLU-GM29:
To turn Bluetooth controls on or off, press and hold the Source button on the steering
wheel. After one second you will hear either one or two confirmation chimes. You MUST			Harness
release the button as soon as you hear the chime. If you do not release the button
within one second after the chime is heard the button will revert to it’s factory function of			SPLITGM29	MOTO2SPLIT
changing the source. One chime indicates that the Bluetooth controls are on; two chimes				Harness
					To Motorola
indicates that the Bluetooth controls are off.	BLU-GM29				IHF1000/1700
When the Bluetooth controls are activated, the driver information center will display
“BT Control ON”. Whenever a call is incoming or active, the steering wheel controls	GM LAN 29bit Universal
	Bluetooth Integration Interface
automatically switch to Bluetooth control. If you would like to access the features menu
of the Motorola IHF1000/1700 you MUST activate Bluetooth controls before this can be
done.

When the Bluetooth controls are de-activated or a call is ended, the driver information center will display “BT Control Off”. Once a call is ended the steering wheel controls automatically switch back to their factory functions.

07-07-09	Pacific Accessory Corporation - Santa Ana, CA 92705	Page 2
	techsupport@pac-audio.com • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com