Repeat A-B Function, Random | Power Acoustik PADVD-220T specs

Repeat

Press the RPT button on remote control or the panel for RPT1 (repeat the current playing file) => RPT ALL (repeat all folders) => RPT folder (repeat current folder) => RPT OFF.

Repeat A-B Function

1.Press A-B button on the remote at the starting point of the section you want to repeat (point A).

2.Press A-B button again at the ending point of the section you want to repeat (point B). Section A-B repeating starts.

3.Press A-B button again to cancel the A-B repeat function.

Random

Press the RDM button on remote or on the panel to play all song tracks in random order. Note: This function is only for audio files.

Intro Playback

Press the INT button on remote or on the panel to play the beginning of every track for 10 seconds in sequence. Press again to cancel INT play.

Note: This function is only for audio files.

Programming the Playback

1.Press PROG button on the remote open program menu.

2.Use/// buttons to select the program position and use digit 0-9 buttons to select the desired track.

3.Move the cursor to select START and press ENTER button on remote to play.

5. Press PROG again or move the cursor to select EXIT to cancel program play.

ZOOM

Press ZOOM button and hold for 2 seconds on remote to activate zoom function in the following sequences: ZOOM 2 => ZOOM 3 =>ZOOM 4 => ZOOM 1/2=>ZOOM 1/3=>ZOOM 1/4=>ZOOM OFF.

Rotate Picture (only for picture files)

In picture mode, press / buttons to rotate picture 90 degrees.

System Menu

In USB/ Card mode, press SETUP button on remote to show system menu. Press/// buttons to set system data, press this button again to save input data and exit system menu.

Page -12