STEP BY STEP INSTALLATION
Step 1: Determine where the speaker will be mounted. Make sure there is a flat area large enough for the speaker to fit properly. An uneven mounting surface can damage the driver.
Step 2: Check to make sure the space you have chosen for the speaker will not interfere with the operation of the vehicle.
Step 3: Using the plastic grille ring as a template, mark the speaker hole with a pen.
Step 4: Cut the hole for the speaker. When using factory locations, this step can be passed. A hole can be cut either with a pair of metal tin snips or a hole saw corresponding to the size of the speaker listed below.
•4 3/4" (120mm) hole saw (C53)
•5 1/2" (140mm) hole saw (C63)
Step 5: Run the speaker wire to the speakers. Make sure to keep wires away from sharp metal or other edges. When passing through metal ,use a protective grommet.
Step 6: Using the plastic grille ring as a template, mark the mounting holes with a pen.
Step 7:
Step 8: The
Step 9: Pull the wire through the speaker opening and connect to the speaker. Be sure to match the crossover wires to the speaker correctly, HF to HF and LF to LF of the speaker.
WARNING: Window mechanisms and electrical wires have a nasty habit of hiding where you least expect. CHECK BEFORE YOU DRILL!
Coaxial Speaker Specifications
|
|
|
|
|
|
|
|
|
|
|
|
|
| Model |
| Nominal |
| Power |
| Frequency | Sensitivity | Mounting |
| Mounting |
|
|
| Impedance |
| Continuous/ |
| Response |
| Depth |
| Diameter |
| |
|
|
|
|
| Maximum |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C53 |
| 3ohms |
| 40/80 |
| 90Hz to 20kHz | 91dB | 2 1/4” |
| 4 3/4” |
|
|
|
|
|
|
|
|
|
| (57mm) |
| (120mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C63 |
| 3ohms |
| 45/90 |
| 60Hz to 20kHz | 91dB | 2 7/8” |
| 5 1/2” |
|
|
|
|
|
|
|
|
|
| (73mm) |
| (140mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C463 |
| 3ohms |
| 40/80 |
| 85Hz to 20kHz | 91dB | 2 1/4” |
| 5.9/16” x 3 3/8” |
|
|
|
|
|
|
|
|
|
| (57mm) |
| (142mm x 86mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C573 |
| 3ohms |
| 45/90 |
| 80Hz to 20kHz | 91dB | 2 3/16” |
| 5 1/16” x 7 3/16” |
|
|
|
|
|
|
|
|
|
| (56mm) |
| (129mm x 183mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C693 |
| 3ohms |
| 50/100 |
| 55Hz to 20kHz | 92dB | 3 1/8 ” |
| 8 7/8” x 6” |
|
|
|
|
|
|
|
|
|
| (80mm) |
| (226mm x 153mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.