Precision Power S2.65C warranty Removable Panels, Door Mounting, Rear Deck Mounting

Page 5

FLUSH MOUNTING THE TWEETER

REMOVABLE PANELS

Step 1: Determine the tweeter mounting location, then route the wires from the crossover to the tweeter location.

Step 2: Mark the center point of the tweeter location.

Step 3: If using a hole saw, first drill a pilot hole, then cut out the hole using a standard 2-1/8" hole saw.

Step 4: If not using a hole saw, use either the cardboard packaging for the tweeters or the surface mount trim ring as a template to mark the proper size hole. Cut out the hole.

Step 5: With the tweeter assembled, route the wires through the hole and the pressure ring and slip the pressure ring over the tweeter assembly.

Step 6: Align the tweeter so the logo faces the desired direc- tion then push the pressure ring on to the rear of the tweeter assembly until the tweeter is snugly mounted to the panel.

Step 7: Connect the speaker wires observing the correct po- larity and re-assemble the panel.

DOOR MOUNTING

When considering possible speaker locations in the doors, be sure to check the operation of the window mechanism and all other moving parts inside the door. Most vehicles use a stabi- lizer stop bar in between the door and the door jamb. This bar prevents the door from opening too far, but may intrude into the speaker mounting area when the door is closed. Many do-it-yourself installers overlook this and check for speaker clearance only when the door is fully open.

REAR DECK MOUNTING

In rear deck installations, check the operation of the trunk suspension springs or tension bars. These tension bars can move when opening and closing the trunk and can exert a great deal of force against anything that obstructs their move- ment, such as a speaker basket or motor assembly. In addi- tion, try to avoid locating the speakers too close to the back edge of the rear deck. Installing the rearmost screws may not be possible without the removal of the rear window.

INSTALLING THE MID-BASS

Step 1: Determine where the speaker will be mounted. Make sure there is a flat area large enough for the speaker to fit properly. An uneven mounting surface can damage the driver and limit the bass performance of your Sedona Series com- ponent system.

Step 2: Check to make sure the mounting location you have chosen for the speaker will not interfere with the operation of the vehicle.

Step 3: Using the supplied template guide, mark the hole with a pen. [Skip this step if using correctly sized factory loca- tions]

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Sedona Series Contents Introduction Installing the CrossoverPractice Safe Sound WHAT’S in the BOXTools of the Trade InstallationFinding Speaker Mounting Locations Flush Mounting the TweeterRemovable Panels Installing the MID-BASSDoor Mounting Rear Deck MountingSurface Mounting the Tweeter

S2.65C specifications

The Precision Power S2.65C is a high-performance component speaker system designed to deliver superior sound quality and clarity in car audio applications. Renowned for its robust build quality and advanced technologies, the S2.65C is tailored for audiophiles seeking an immersive listening experience while on the road.

One of the standout features of the S2.65C is its impressive 6.5-inch composite woofer. This woofer is engineered to produce deep, rich bass tones without compromising midrange clarity. The composite construction enhances durability while minimizing distortion, allowing the speaker to reproduce a full range of frequencies with remarkable accuracy. Additionally, the woofer's design includes a high-temperature voice coil, which ensures that the speaker can handle high power levels without overheating.

Complementing the woofer is a 1-inch silk-dome tweeter, which excels at delivering crisp, detailed highs. The silk dome material provides a smooth response across a wide frequency range, ensuring that vocals and instrumentals are rendered with a natural, airy quality. The tweeter is also equipped with a neodymium magnet, which enhances sensitivity and allows for a better dynamic response.

Another notable characteristic of the Precision Power S2.65C is its versatility in installation. The speakers come with a range of mounting options, making them suitable for various vehicle types. Their shallow mounting depth allows for fitment in spaces where larger speakers may not fit while still delivering exceptional sound performance. The inclusion of a crossover network ensures that each driver receives the appropriate frequencies, optimizing the overall sound quality.

The S2.65C also features advanced sound engineering technologies. One such technology is the high-pass filter, which prevents low frequencies from reaching the tweeter, resulting in a clearer high-frequency response. Additionally, the speakers are built to withstand the rigors of automotive environments, with weather-resistant materials designed to resist moisture and temperature fluctuations.

In summary, the Precision Power S2.65C stands out in the crowded car audio market with its combination of high-quality components, advanced technology, and durable construction. Whether used for casual listening or critical sound evaluation, these speakers provide an outstanding auditory experience, making them an excellent choice for car audio enthusiasts looking to elevate their in-car sound system.
Top Page Image Contents