Midbass Features, Motor Assembly | Precision Power PC3.65C, PC2.65C

6.5” Midbass Features

Motor Assembly

The Neo motor is protected by a durable aluminum motor cover which also acts as a heat sink to withdraw heat and in- crease power handling along with the vented pole piece. On top of the pole piece is a solid aluminum phase plug. The phase plug also helps to cool the motor as a heatsink and it eliminates compression found under a traditional dustcap. But the reason for justifying the added expense is found in the re- sponse, especially through the crossover region of frequen- cies. This is accomplished by reducing pathlength differences at the highest frequencies coming off of this midbass driver and allowing for a much smoother blend into the lower fre- quencies of the midrange driver.

Voice Coil & Terminals

The voice coil utilizes a high-temp 2" Til former (fiberglass/ Teflon composite). The terminals use screws rather than springs for more secure connections, less resistance and bet- ter conductivity. From the terminals, the wires carefully wrap around the outer edge of the spider landing until they meet with the spider leads symmetrically on each side of the driver. The top of the former couples to an aluminum collet. The col- let not only helps to dissipate more heat, but it also secures and stiffens the joint to the cone, resulting in less cone flex and less cone radiated distortion.

Diaphragm

Certainly, one of the most important pieces of a speaker is the actual cone. Some audiophiles prefer paper, even with all of the other materials available. Some people prefer polypropyl- ene, aluminum, Kevlar, fiberglass and even bamboo. Time always brings us new technologies and new materials. This cone is a composite material featuring Kevlar to reinforce pa- per. One of the secrets that make these drivers sound so good and natural is the layer of laminated foam on the back of the cone. Modern times require modern measures...

And here is the way they judge for HEIGHT…

Vehicles with a higher and more linear stage height (as the lines on the above graph demonstrate) will earn top scores…

If all staging characteristics (depth, width, height) score well, the soundstage will be phenomenal. Positioning of each musical instrument and the vocalist(s) will yield a realistic and enjoyable listening experience.

The next pic not only gives you an idea of stage width and depth, it also gives you an idea of “imaging” (where the instru- ments and vocals are located on the sound stage). Properly po- sitioned speakers will not only give you great sound stage depth, width and height, but also image well, recreating the ex- act positions of the instruments and vocals on the sound stage.

PC2.65C, PC3.65C specifications

Precision Power is a renowned name in the audio industry, celebrated for its high-performance speakers and amplifiers. The PC3.65C and PC2.65C are two notable models in their lineup that deliver impressive sound quality and advanced technological features, making them ideal choices for both enthusiasts and casual listeners.

The PC3.65C is a 3-way component speaker system that features a 6.5-inch polypropylene woofer, a 3-inch mid-range driver, and a 1-inch silk dome tweeter. This configuration ensures a well-balanced audio experience with clear highs, rich mids, and deep bass. The polypropylene cone is not only lightweight but also durable, aiding in minimizing distortion while maximizing sound quality.

In addition to its speaker components, the PC3.65C also incorporates advanced technologies such as a dedicated external crossover network. This passive crossover design allows for optimal frequency distribution among the woofers, mids, and tweeters, enhancing the overall performance of the system. The crossover ensures that each driver only handles the frequencies it is designed for, resulting in a clearer and more dynamic sound profile.

Similarly, the PC2.65C is a 2-way component speaker system, designed to provide an exceptional listening experience with its 6.5-inch woofer and a 1-inch silk dome tweeter. Like its 3-way counterpart, the PC2.65C benefits from a robust and lightweight construction that contributes to its reliability and sound fidelity.

Both models boast a high power handling capacity, making them suitable for a wide range of amplifiers. They feature a high sensitivity rating, which means they can deliver powerful sound even at lower power levels. Furthermore, the installation flexibility is a significant advantage, with options for both drop-in and custom mounting, making these speakers a fantastic choice for various vehicles and audio setups.

Overall, the Precision Power PC3.65C and PC2.65C stand out for their build quality, advanced technology, and exceptional acoustic performance. With their ability to deliver a rich and immersive audio experience, they are perfect for those looking to upgrade their car audio systems or enhance their home sound setups. Whether you prioritize deep bass, crystal-clear highs, or a balanced sound stage, these speakers are engineered to meet the diverse needs of audio enthusiasts. Ultimately, Precision Power continues to uphold its reputation by producing high-quality products that deliver superior audio performance.