Niles Audio OS-10 manual Installation, Mounting the Bracket

Page 16

INSTALLATION

INSTALLATION

Mounting the Bracket

1.Remove the bracket knobs and the bracket from the speaker.

2.Hold the bracket up to the mounting surface. The speaker can be mounted either horizontally or vertically. Hold the bracket so that the speaker wire fits through the large, circular wire hole in the bracket. Align the bracket to be square with the surroundings (use a level for accuracy).

3.Mark the locations of the three oval-shaped screw holes (See Figure 9). Be sure to use all of the holes.

4.Drill pilot holes into the mounting surface.

Figure 9

Mounting the

OS-10

5.Pull the speaker wire through the wire hole in the center of the mounting bracket. Align the bracket so that the holes all line up.

6.Use your hardware to attach the bracket to the mounting surface.

15

Image 16

Contents OS-10 Table of Contents CongratulationsIntroduction Features & Benefits Precision CrossoverElastoDynamic Hybrid Dome Tweeter Long Throw Polypropylene WooferStable Shelf Placement Rigid, Acoustically Inert EnclosureLow Diffraction Grill and Front Baffle Tapering ShapePremium Gold-Plated Five-Way Binding Posts Easy Finger-Sized AccessWeather-Resistant Construction Parts Guide Wiring Installation ConsiderationsTools and Materials Required Incorporating a Volume Control Recommended Amplifier PowerPlacing the OS-10 for the Best Sound Quality Mounting Methods Safety First OS-10can be mounted three waysTools Required Painting the OS-10Preparing to Paint Painting the Cabinet, Bracket Knobs and Bracket Painting the GrillReplacing the Grill Installation Mounting the BracketConnecting the Speaker Speaker PhaseFinal Adjustments Cleaning Listening at Higher VolumesOperation Specifications Detach Here Warranty Registration Card IncomeLimited Warranty Niles Audio CorporationNiles Audio Corporation