Resetting the Stereo

High-Power In-Dash AM/FM Stereo CD Player		Faxback Doc. # 48532
(120-2154/55)	Troubleshooting

This document contains instructions for both Cat. No. 120-2154 and

120-2155 stereos. (You can find the Cat. No. of your model on the top of the stereo.) 120-2154 has a LOUD button while 120-2155 has an FSM button. Unless otherwise noted, these are the primary differences between the two units listed.

If your stereo's CD player is not working as it should, it displays an error indicator. If it is a numbered error, it ejects the CD. Try these suggestions.

Indicator	Problem	Suggestion
E01	Loading and/or unloading	Make sure a CD is
	operation fails.	loaded. If it is not,
		insert the CD properly.
		If it is, eject the CD
		and load it again.
E07	The CD is loading	Reload the CD with the
	incorrectly.	label side up.
	The CD is dirty or	Clean the CD (see "CD
	defective.	Care Tips" in Faxback
		Doc. # 48533) or try
		another CD.
no cd	No CD is loaded.	Load a CD.

If the stereo still does not operate properly, the connecting pins in the recess or on the back of the control panel might be dirty. Use a soft cloth or a contact cleaner (such as Cat. No. 64-4340) to clean them.

If the stereo still does not operate properly, take it to your local RadioShack store for assistance.

If your stereo locks up or does not work properly, remove the front panel and use a straightened paper clip to press the reset button on the bottom left side of the inside panel for about 1 second.