Stereo Cassette | Memory | Faxback Doc. # 6930 |
Storing Stations
You can store up to 12 AM and 18 FM stations in memory. You can then select a stored station by pressing the correct memory location button.
1.Press BAND to select the desired band.
2.Use either of the tuning methods to tune to the station you want to store.
3.Press and hold the desired memory location button for about 2 seconds until it sounds a beep.
The band number, the frequency, and the memory location number appear on the display to show that the station is stored.
Automatically Storing Stations
You can let the stereo automatically store stations. You can then select a stored station by pressing the correct memory location button.
1.Press BAND to select the desired band (AM1, AM2, FM1, FM2, or FM3).
2.Use either of the tuning methods to tune to the frequency just before the first station you want to store.
3.Press and hold down AMS for about 3 seconds. The stereo scans the selected band, then, after about 2 seconds, automatically stores the first six stations it finds. The stereo beeps as it stores the first and last stations.
The band number, the frequency, and the memory location number appear on the display.
4.Press AMS when the stereo has stored the six stations.
Note: If you do not press AMS, the stereo will scan the band again and tune to each stored station for about 5 seconds.
Selecting a Stored Station
To select a stored station, simply press the desired memory location button. To scan stations you already stored press AMS.