MTX Audio THUNDERFORM warranty Tools Required for Installation, Amplified Thunderform

Page 2

READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING

MOUNTING LOCATION: The enclosure mounts behind the driver’s seat on Chevy S10 Regular Cab Trucks, GMC Sonoma and Isuzu Hombre.

TOOLS REQUIRED FOR INSTALLATION:

Powered Screwdriver

#2 Phillips Head Bit

Wire Cutte rs

5/16” Wrench

Terminal Crimpers

 

INSTALLATION: Follow the steps below

1Place enclosure behind seat, with woofer firing forward (do not mount yet).

2If externally amplified make speaker connections to the enclosure from the amplifier; loosen terminal knobs (a 13-mm nut driver can be used). Connect speaker wires from amplifier to enclosure, positive to red terminal knob and negative to black terminal knob. Refer to Step 25 for mounting directions.

AMPLIFIED THUNDERFORM

Routing Power Wire; we recommend a connection directly to the battery.

3Remove driver side threshold trim; pull up on trim, it will remove eas-

ily.

4.Using furnished wiring harness route 10ga red power wire starting at pre-amp location. Route wire on driver's side, over to threshold and under

For technical assistance call 1-800-CALL MTX.

These instructions are guidelines only and in no way are intended to replace a professional installation. As always before screwing or drilling check to make sure you will not damage any wires or hoses or cause damage to the vehicle.

Warning: Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When charging or working near a battery, always shield your face and protect your eyes. Always provide ventilation.

Conventional Wiring of Aftermarket Radio

20 Amp Fuse

+

Low Leve l Signal

Optional EBC

(Electronic Bass Control)

INPUT

 

RIGH T

GAI N

S

REM

LEFT

X-OVER

STATU

Tu rn On Lead

1

6

 

Image 2
Contents Warranty Statement Chevy S-10 REG CABAmplified Thunderform Tools Required for InstallationConventional Wiring of Aftermarket Radio For technical assistance call 1-800-CALL MTXTroubleshooting Tips if AMP does not Turn on Setting GainSetting Crossover Ignition OFF When Disconnecting BatterySpeaker Wires Connection to Enclosure

THUNDERFORM specifications

MTX Audio has established a reputation for delivering high-quality audio equipment, and one of its standout products is the MTX Audio THUNDERFORM. This innovative subwoofer enclosure is engineered to enhance the audio experience in specific vehicle models while providing powerful low-frequency output.

The THUNDERFORM is designed with a unique and innovative form factor, seamlessly integrating into the vehicle's interior without sacrificing space or utility. One of its key features is that it's custom-fit for various vehicle makes and models, ensuring an OEM (original equipment manufacturer) appearance. This design not only enhances aesthetic appeal but also maintains the functionality of the vehicle.

At the heart of the THUNDERFORM is its subwoofer technology. The enclosure typically houses a high-performance subwoofer that delivers deep, rich bass. This subwoofer is designed to handle significant power, resulting in a dynamic audio experience that can elevate any music genre. The enclosure's construction ensures durability and resistance to vibrations, leading to prolonged longevity.

Another distinguishing characteristic of the MTX Audio THUNDERFORM is its easy installation process. Designed with the user in mind, installation requires minimal modifications, allowing car enthusiasts to enjoy upgraded sound systems without extensive alterations to their vehicles. This is particularly appealing to those who want to enhance their audio without permanent changes.

Additionally, the THUNDERFORM features a well-constructed ported design, which enhances the efficiency of sound production. This design not only increases the output from the subwoofer but also minimizes distortion, providing clean and powerful bass that can be appreciated at any volume. The careful engineering behind the THUNDERFORM guarantees that it reproduces low frequencies accurately and handles powerful audio signals with ease.

In summary, the MTX Audio THUNDERFORM is a premium subwoofer enclosure that combines innovative design, high-performance subwoofer technology, and ease of installation. Its custom-fit nature allows for a flawless integration into vehicles, while its robust construction ensures long-lasting performance. Designed for audiophiles and casual listeners alike, the THUNDERFORM is a smart choice for anyone looking to elevate their in-car audio experience. With MTX Audio's commitment to quality and performance, the THUNDERFORM stands out as a premier option for enhancing vehicle sound systems.