Introduction, Speciﬁcations | MTX Audio TA2301 instruction

TA2301 Owners Manual

Introduction

Thank you for choosing MTX to help reach your ultimate goal with your vehicle. Adding MTX ampliﬁers and matching MTX speakers and subwoofers with StreetWires connections will put you in a better position to hear, feel and experience all of the music the artist intended you to hear.

Speciﬁcations

Primary Ratings:

Power Output: 150 Watts RMS x 1 Channel at 4 Ohms and ≤ 1% THD+N

Signal-to-Noise Ratio (1Watt): 73dB

Secondary Ratings

Power Output: 300 Watts RMS x 1 Channel at 2 Ohms and ≤ 1% THD+N

THD+Noise (Distortion) (1Watt): ≤ .5%

Frequency Response (-3dB): 20Hz-120Hz

Maximum Input Signal: 10V

Maximum Sensitivity: 100mV

Dimensions: 9-5/8” x 12-11/16” x 2-1/2” (245mm x 325mm x 65mm)

Smart Engage Auto Turn-on (Patent No: US06556683)

Patented Adaptive Class D Technology (Patent No: US06753729)

Patented Power Supply (US05598325)

Input Sensitivity Switch: 100mV-1V/1V-10V

Crossover: Low @ 80Hz, 24dB or 120Hz, 24dB

ThunderEQ Boost 12dB, Freq. 40Hz (Switchable)

Remote Subwoofer Level Control

Features

1. Prizm EFX – All MTX ampliﬁers include backlit adjustment controls on top surface of product.

•Color – The backlit controls offer unlimited colors on the display -- from RED, GREEN, BLUE, or any color in between.

• EFX – You can switch Prizm EFX lighting to “pulsate” with beat of music.

2.Xtant Technology Cooling (XTC) – thermal-regulated turbo-charged inner cooler, supplies fan forced cool air evenly and constantly through tightly packed, bonded ﬁns. Fan speed is continuously variable and controlled by ampliﬁer’s output load, temperature of heatsink and transformers. Exhaust of internal heatsink is strategically positioned to cool transformers to maintain maximum performance at all volumes.

3.Bi-Level Inputs with Smart Engage – All MTX ampliﬁers feature RCA type input connections. All MTX ampliﬁers allow both high level and line level input into the RCA type input connections.

•Low Level Input – All MTX ampliﬁers feature RCA type input connections. Source units with an output signal level of 100mV–10V may be used. See “Input Sensitivity” for proper voltage level setting.

•High Level Inputs with Smart Engage – All MTX ampliﬁers allow high level inputs through RCA type input connections using provided high level adapters. Source units with an output signal level of 100mV–10V may be used. See “Input Sensitivity” for proper voltage level setting.

•Smart-Engage" Auto-turn-on: is an auto-turn-on circuit included within the ampliﬁer. A remote turn-on wire is not necessary when connecting the ampliﬁers high-level input to a high-powered source unit (Car Stereo). The ampliﬁer will automatically turn on when music is received through this type of connection.

Note: Smart engage is only active on the left input.

4.Input Sensitivity –The input sensitivity switch is used to set the proper input voltage range:

X1 POSITION: 100mV – 1V (Typically for RCA Input)

X10 POSITION: 1V – 10V (Typically for Speaker Level Input)