Connections

1.Bi-Level Inputs (Low/High Level Input) with Smart Engage™ –

Both a low and high level signal can be used. Be sure to lay the signal wire away from all power cables and vehicle computers. Use high quality twisted pair interconnect cables to decrease the possibility of radiated noise entering the system.

•Using RCA Connections: If the source unit has RCA outputs, simply attach a signal cable from the source unit to the amp’s RCA input. This will provide signal to the amp.

•Using Speaker Level Connections: If the source unit does not have RCA outputs, a high level signal can be used instead by taking the supplied high level RCA adaptor cables and connecting the bare wire ends to the vehicle’s rear speaker wiring. Connect the left negative speaker wire to the green with black stripe wire on the supplied high level RCA adaptor. Connect the left positive speaker wire to the solid green wire. Do the same for the right speaker connection using the purple wire. Now plug the RCA connectors into the amp’s INPUTS.

2.Speaker Wire Connections –

When installing the speaker wires, please take proper measures to protect them. For example, when connecting the door speakers, the speaker wire should run from the ampliﬁer’s output terminals, under the carpet, and through the factory rubber boot (loom) that protects the wires in the inner door jam. If the factory boot cannot be used, take other measures to protect these wires. Sometimes the door has to be completely removed to use the factory boot. If this is something that you do not feel comfortable doing, please ask a professional to help you.

When connecting the speaker wires to the ampliﬁer, please observe the printed polarity markings on the ampliﬁer’s StreetWires connector. Failing to wire the speakers in proper phase could result in a loss of bass response or poor overall sound quality.

These amps will have two PARALLEL speaker terminals: a positive and negative for a single woofer and an OPTIONAL second set of positive and negative terminals for a two woofer conﬁguration. These amps can drive a minimum of a 2 ohm load.

Note: Please pay attention and make sure the speakers or woofers are the correct IMPEDANCE (OHMS) BEFORE attaching to the ampliﬁer.

3.Power Terminals – Please take proper measures during installation to protect the power wires as best you can. For example, when running the power cable from the vehicle’s battery through the ﬁrewall, use a ﬁrewall bushing for protection. Run the power wire through the interior of the vehicle under the carpet and to the ampliﬁer. If this is something that you do not feel comfortable doing, please ask a professional to help you. Be sure to lay the power wire away from all signal cables.

When connecting the power wires to the ampliﬁer please observe the printed markings on the ampliﬁer’s StreetWires power connector. Failing to wire the power cables properly could result in ampliﬁer damage.

•+12V: This is the main power input for the ampliﬁer and must be connected directly to the positive terminal of the car battery for the ampliﬁer to operate properly. It is important that a main fuse is installed a maximum of 18” from the battery.

•GND: This is the ground connection for the ampliﬁer and must be connected directly to the metal chassis of the vehicle for the ampliﬁer to operate properly. A properly grounded ampliﬁer can be run harder and longer than a poorly grounded ampliﬁer. The ground on the ampliﬁer should be as short as possible and be connected directly to the vehicle’s metal chassis. Do not connect to Factory bolts of ANY kind. When attaching the ground to the chassis, sand all the paint away from the contact point. A grounding block like the StreetWires GT4 should be used whenever possible as this piece of equipment has 5 times the surface area of a normal screw.

The gauge of the power and ground wire is often an overlooked aspect of ampliﬁer installation. The more power the ampliﬁer receives, the more power it will produce. Power cables have a natural resistance, and will lose voltage by the time the power makes its way to the ampliﬁer. The larger gauge (diameter) wire will hold more voltage over longer runs. Also, by having a larger diameter ground wire, the ampliﬁer can run more efﬁciently. MTX recommends using a minimum of 4 gauge power and ground cables to get the best performance.

•REM: This connection turns the ampliﬁer on and off and needs to be connected to a remote turn-on wire from your source unit if you are using a low level input connection.

TA4501 specifications

The MTX Audio TA4501 is an impressive monoblock amplifier that showcases the brand's commitment to delivering exceptional audio performance. Designed for car audio enthusiasts, the TA4501 is a perfect addition to any sound system, providing robust power and versatility. With a maximum output of 450 watts RMS at 1 ohm, the amplifier ensures that your subwoofers receive the necessary power to produce deep, thumping bass that can be felt throughout any vehicle.

One of the standout features of the TA4501 is its Class D technology, which enhances efficiency while reducing heat output. This design allows for high power output without the need for extensive cooling systems, making it an ideal choice for compact installations. As a result, users can enjoy prolonged periods of high-performance audio without worrying about overheating or system damage.

The TA4501 also includes a variable low-pass filter, allowing users to control the frequency range of the signal sent to their subwoofers. This customization enables a tailored listening experience, optimizing the sound output for any genre of music. Additionally, the bass boost feature further enhances the low-end frequencies, providing an extra punch that can be critical for those looking to amp up the bass presence in their audio setup.

For ease of installation, the MTX Audio TA4501 comes equipped with high-level inputs, enabling users to connect the amplifier to factory-installed head units without requiring external line converters. This capability simplifies the setup process, making it accessible to a wider range of users, from experienced car audio installers to novice enthusiasts.

Moreover, the TA4501 boasts a compact form factor, which not only conserves space but also ensures that it can be discreetly mounted in various locations within a vehicle. The amplifier's durable construction and finished look guarantee that it can withstand the rigors of car environments while maintaining its aesthetic appeal.

Overall, the MTX Audio TA4501 combines power, efficiency, and flexibility, making it a preferred choice for those seeking to elevate their car audio systems. With its range of features and impressive performance capabilities, the TA4501 is designed to deliver an exceptional listening experience that caters to the demands of every music lover. Whether you're a casual listener or a dedicated audiophile, this amplifier will not disappoint in delivering top-notch sound quality.