Metra Electronics 99-8219 installation instructions ISO Radio Provision with Pocket

99-8219KIT ASSEMBLY

ISO RADIO PROVISION WITH POCKET

*Note: Refer also to the instructions included with the aftermarket radio.

1Slide the housing brackets onto the side of the radio housing until the clips engage. Note: Brackets are marked left and right. (Figure A)

2Mount the ISO Brackets to the aftermarket radio using the screws supplied with the radio.

(Figure B)

3Slide the radio into the radio housing until the side clips engage. Snap the Trim-plate into the Radio Housing. (Figure C)

Continue to final assembly.

A

B

C

3