Metra Electronics 99-7343 installation instructions Kit Assembly

Page 5

99-7343

Kit Assembly

1.Snap the a/c vents into the a/c vent trim panels. (Figure A)

2.Attach the left and right a/c vent trim panels and the climate controls to the main radio housing panel using the provided (10) #8X1/2” Phillips screws and (2) #8X1/4” Pan head screws. (Figure B)

(Figure A)

3.Snap the hazard switch into the main radio housing. (Figure C)

Continued on next page

(Figure C)

NOTE: #8X1/4” Pan head screws must be installed in the indicated locations.

(Figure B)

5

Image 5
Contents Panel Removal Tool Phillips Screwdriver Socket Wrench Hyundai Sonata99-7343 Table of Contents Figure B Dash DisassemblyFigure E Snap the a/c vents into the a/c vent trim panels. Figure a Kit AssemblyKit Assembly Double DIN head unit provisions ISO DIN head unit provisionsREV /16/11