ISO Mount Radio Provision with Pocket

	*Note: Refer also to the instructions included with the aftermarket radio.
1	Cut and remove the top (2) mounting	A
	holes off of the radio housing.
	Note: The notch in the housing
	should be on top. (Figure A)
2	Slide the included brackets onto the
	sides of the radio housings pocket
	from the back of the housing
	forward. (Figure B)
3 Mount the ISO Brackets to the head
	unit with the screws supplied with
	the unit. (Figure C)
		B
4	Slide the head unit into the radio
	opening until the side clips engage.
	(Figure D)
5	Snap the trim plate into the Radio
	Housing. (Figure D)

Continue to final assembly.

ISO MOUNT RADIO PROVISION WITH POCKET