Metra Electronics 99-7610HG, 99-7610B Reassemble dash in reverse order of disassembly

Page 7

99-7610

1.Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure C)

2.Slide the head unit into the radio opening until the side clips engage. (Figure D)

3.Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS.

4.Attach the trim plate supplied with the kit to the front of the radio housing assembly. (Figure D)

5.Reassemble dash in reverse order of disassembly.

Figure C

Figure D

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 99-7610B 99-7610HG Table of Contents Unclip and remove the panel above the radio. Figure A, B UP Nissan VersaNissan Juke DIN Head Unit Provision Side ISO Mount Radio ProvisionReassemble dash in reverse order of disassembly Double DIN Mount Radio Provision 99-7610 99-7610 99-7610 REV /26/11
Top Page Image Contents