Receiving stations
| TUNING/PRESET | |
|
| TUNING/PRESET |
|
| U |
STANDBY/ON MEMORY FM MODE |
| VOL ME |
DISPLAY | INPUT | |
|
| E |
|
| C |
|
| N |
CLEAR | E |
S | |
E | |
| R |
| P |
| C |
| TI |
| US |
| O |
PHONES | AC |
MIN | MAX |
MEMORY INPUT 
1
Remote controller
INPUT
INPUT 
2
TUNING/PRESET 
MEMORY FM MODE
AUTO
MEMORY
CLEAR
STANDBY/ON CLOCK
CALL
2 3
1
5 | 6 | INPUT | INPUT |
4 |
|
|
|
8 | 9 | A.PRESENCE |
|
|
| ||
7 |
|
|
|
+10 CLEAR
0MUTING
MEM RANDOM
SLEEP | REPEAT |
CD 
TUNER
TIMER
PRESET
TAPE
ENTER
Tuning the radio
1.Select FM or AM using the INPUT 
buttons or the IN-
PUT 
buttons on the remote controller.
2.Press and hold the TUNING/PRESET 
buttons for about 0.5 seconds to change the frequency.
The indoor antenna should be installed on a wall or other surface in the position which gives the best reception. For more informa- tion on how to install the antenna, refer to pages 10 and 11.
To 
but- tons while the frequency is flashing.
Using Auto Memory (FM only)
This function enables you to store the frequencies into memory au- tomatically, without having to go through and store each frequency manually.
In FM mode, hold down the MEMORY button for a few seconds. The MEMORY indicator lights up on the display and “AUTO” will start flashing on the display. Keep holding down the button for a few more seconds to start the Auto Memory function.
The frequencies are scanned from low to high. Up to 30 FM stations with the best signal quality are selected, sorted in order from low to high frequency, and stored into the preset memory.
Note
•All stations previously stored in memory will be replaced with new Auto Memory stations.
22